By Artur M., Service expert Allentown office
Job at a glance
- Location
- Riegelsville, PA
- Service
- Panel Replacement
- When
- October 2026
- Service expert
- Artur M.
- Called about
- damage to the meter, mast or service cable outside the home
- Service size
- 100 amp
- Panel brand
- Siemens
- Visits
- 2
- Options offered
- 3
- Inspection
- Passed
What this type of job typically costs
$7,425 to $11,875
Panel replacement, everything on the job
From 856 jobs we completed in the last 18 months.
The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.
Range updated November 10, 2026.
About this service →
A Riegelsville client contacted Thomas Edison Electric after noticing frayed wires on the outside of their home during a loan inspection. They wanted to understand their options for correcting the issue and ensuring their electrical system was safe.
The client's problem
The client had observed deteriorated wiring on the exterior of the home and was concerned about the condition of their electrical service equipment.
What our service expert found
The service expert inspected the exterior wiring and discovered that the damage extended beyond the visible frayed wires. The meter socket was rusted out, and rust and corrosion had spread inside the electrical equipment, including the panel. This level of deterioration meant the existing equipment could no longer be considered safe or reliable.
Options we presented
The service expert presented three options ranging from a panel and meter replacement with surge protection to a complete system upgrade with a larger capacity panel and enhanced grounding.
100 Amp 30-Space Siemens Panel & Meter with Surge Protection (the client chose this one)
Panel replacement and meter combo disconnect with surge protection and upgraded grounding
40-Space 200-Amp Siemens Panel with Meter, SEU, Whole House Surge Protection and Grounding System
The solution
The client chose the 100 Amp 30-Space Siemens Panel and Meter with Surge Protection. The team replaced the corroded meter base and installed a new rigid galvanized service mast up to ten feet. They installed the new 30-space Siemens main breaker panel and added a full grounding system. A Type 1 service entrance surge protective device was installed to protect the home from power surges, and GFCI protection was included as part of the panel replacement. The work required two visits, and the project passed inspection.
Work performed
Replaced corroded meter base with new meter socket
Installed rigid galvanized service mast up to ten feet
Installed Siemens 30-space 100 amp main breaker panel
Added full grounding system
Installed Type 1 service entrance surge protective device
Installed GFCI protection with panel replacement
What we installed
- Siemens BR 15 Amp Single Pole Breaker× 10
- Siemens BR Q120 20 Amp Single Pole Breaker× 10
- Siemens BR 20 Amp 2 Pole Breaker
- Siemens BR 30 Amp 2 Pole Breaker
- Siemens BR 50 Amp 6 AWG 2 Pole Breaker
- Nipple 1 and 2" Rigid Conduit Offset
- RACO 192, 1900 Box 1-1 and 2D - 1 and 2-3 and 4KO Raised Grnd
- RACO 808C, 1900 GFCI Cover
- Eaton TRGF15W 15 Amp 125 VAC GFCI Tamper-Resistant White Outlet
- Acorn Clamp 5 and 8 Acorn Direct Burial Bronze Ground Rod Clamp× 2
- Ground Clamp Aluminum 1 and 2 to 1"
- Intersystem Bonding Grounding Bridge - ARLGB5
Why pricing varies
No two homes are wired the same. On this job, the price came down to:
- Service size and whether the main breaker rating changes
- Condition of the existing enclosure, bus bars and breakers
- Grounding and bonding that must be brought up to current code at the same time
- Service entrance conductors and the meter can, when they are part of the scope
- Utility coordination and permit requirements in the jurisdiction
- Surge, AFCI and GFCI protection added during the changeout
- Panel brand and breaker selection
- Accessibility of the panel location and any drywall or masonry work around it
- Code corrections found once the deadfront is off
A service expert prices your job after seeing it, and you approve the price before any work starts.
Why it matters in Riegelsville
Older homes in rural Bucks County communities like Riegelsville can develop hidden corrosion in outdoor electrical equipment, especially when exposed to weather over many years. Rust inside a meter socket or panel creates resistance that can lead to overheating and potential fire hazards. Replacing deteriorated service equipment and adding modern surge protection helps keep the home safe and the electrical system functioning properly.
Common questions
How can I tell if my meter socket or panel has rust damage?
Visible rust on the exterior is one sign, but corrosion often develops inside where it is not visible. A qualified electrician can open the equipment and inspect for internal rust, which can compromise connections and create safety hazards.
Why does a rusted meter socket need to be replaced?
Rust creates poor electrical connections that can cause overheating, arcing, and potential fire hazards. A corroded meter socket also may not provide a proper seal against moisture, which accelerates further deterioration.
What is a service entrance surge protector and why is it recommended?
A service entrance surge protector is installed at the main panel or meter to intercept power surges before they enter your home. It helps protect appliances, electronics, and the electrical system itself from damage caused by lightning or utility grid fluctuations.
Why is upgrading the grounding system important during a panel replacement?
The grounding system provides a safe path for electrical faults to dissipate into the earth, reducing the risk of shock and fire. Older grounding systems may not meet current standards or may have deteriorated, so upgrading ensures proper protection.
Project photos
The service expert on this job
Artur M.
Service expert
Artur is a service expert with Thomas Edison Electric. He has completed more than 1,100 jobs for clients in Bucks, Philadelphia and Montgomery counties. His most common calls are lighting and ceiling fans, outlets and switches, troubleshooting and panel upgrades.
More about Artur →Reviewed by a licensed Thomas Edison Electric service expert on November 9, 2026.
Where this job was
Riegelsville, Pennsylvania, in Bucks. Electrical service in Riegelsville
Related
- More panel upgrade case studies
- Panel Replacement: how we do this job
- More jobs from the Allentown office
- Electrical service in Riegelsville
- Main Breaker Failed and the Power Went Out in Springfield, PA: 200 Amp Panel and Service Upgrade
- 200 Amp Panel and Service Upgrade in Allentown, PA
- More jobs by Artur M.
- Our electrical services
- Contact Thomas Edison Electric



