By Mike V., Service expert Allentown office
Job at a glance
- Location
- Bethlehem, PA
- Service
- Light Fixture Repair and Installation
- When
- September 2026
- Service expert
- Mike V.
- Called about
- a light fixture or fan that was not working
- Panel brand
- Eaton
- Visits
- 1
- Options offered
- 4
- Inspection passed
- No
What this type of job typically costs
$325 to $625
Light fixture installed
From 220 jobs we completed in the last 18 months.
The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.
Range updated November 10, 2026.
About this service →A Bethlehem homeowner contacted Thomas Edison Electric about two projects: a hallway light fixture that had fallen from the ceiling and a basement ceiling fan they wanted replaced with an outlet for a projector. The service expert arrived to address both requests and evaluate the home's electrical system.
The client's problem
The client had a surface-mounted light fixture in their upstairs hallway that had fallen and needed to be remounted. They also wanted to remove a ceiling fan in the basement and install an outlet in its place to power a projector.
What our service expert found
The service expert found the second-floor light fixture hanging from the ceiling and confirmed it needed to be properly rehung. During a visual inspection of the home's electrical system, the service expert observed a ten-year-old Eaton circuit breaker panel with no surge protection and signs of over-surging on the bus bar. This lack of protection left the home's electronics and appliances vulnerable to power surges from storms or utility fluctuations.
Options we presented
The service expert presented several options to address the client's requests and the surge protection concern.
Reinstall the client-provided hallway light fixture
Install a whole home surge protector at the main panel to protect electronics and appliances
Remove the basement ceiling fan and install a receptacle for the projector
Complete package including surge protection, light fixture installation, and projector receptacle (the client chose this one)
The solution
The client chose the comprehensive option that addressed all their needs plus the surge protection concern. The service expert installed a whole-house surge protector at the Eaton panel to guard against future power surges. The basement ceiling fan was removed and a tamper-resistant duplex receptacle was installed in its place for the projector. Finally, the client-supplied hallway light fixture was properly mounted to the ceiling.
Work performed
Installed whole-house surge protector at the Eaton panel
Removed existing basement ceiling fan
Installed tamper-resistant duplex receptacle in basement ceiling for projector
Mounted client-provided light fixture in upstairs hallway
What we installed
- Mulberry 76101, 1G Duplex Semi Gloss White Metal Plate
- Pass & Seymour 3232-TRW Tamper-Resistant, Duplex Grounding Receptacle. 15 Amp, 125 Volt, White
- Eaton CHNSURGE Surge Protector Type 2 SPD 3 kA
Why pricing varies
No two homes are wired the same. On this job, the price came down to:
- Number and type of fixtures
- Ceiling height and mounting conditions
- Condition of the existing boxes and wiring
- Switching, dimming and smart controls
- Fixture selection and any client-supplied fixtures
A service expert prices your job after seeing it, and you approve the price before any work starts.
Why it matters in Bethlehem
Homes in the Lehigh Valley can experience power surges from summer storms and utility grid fluctuations. A whole-house surge protector at the panel provides a first line of defense for sensitive electronics like projectors, computers, and appliances. Addressing this during a routine service call helps protect the home before damage occurs.
Common questions
What are signs of over-surging on a panel bus bar?
Over-surging can leave visible marks, discoloration, or pitting on the metal bus bars inside the panel. These signs indicate the panel has absorbed power surges that could have damaged connected electronics and appliances.
Why should I add a whole-house surge protector if I already use power strips?
Power strips only protect devices plugged directly into them and have limited capacity. A whole-house surge protector installed at the main panel stops surges before they enter your home's wiring, protecting all circuits including hardwired appliances like HVAC systems and refrigerators.
Can I replace a ceiling fan with an outlet myself?
While it may seem straightforward, this work involves removing a fixture, properly capping or rerouting wires, and installing a ceiling-mounted receptacle that meets current electrical codes. A licensed electrician ensures the work is done safely and correctly.
Why use a tamper-resistant receptacle for a ceiling outlet?
Tamper-resistant receptacles have built-in shutters that prevent foreign objects from being inserted into the slots. Current electrical codes require them in most locations for safety, even in areas like ceilings where access seems limited.
The service expert on this job
Mike V.
Service expert
More about Mike →Reviewed by a licensed Thomas Edison Electric service expert on November 19, 2026.
Where this job was
Bethlehem, Pennsylvania, in Lehigh. Electrical service in Bethlehem
Related
- More lighting case studies
- Light Fixture Repair and Installation: how we do this job
- More jobs from the Allentown office
- Electrical service in Bethlehem
- Outlets Not Working in Lehighton, PA: New Bedroom Circuits and a 50 Amp Range Outlet
- Recessed Lighting Installation in Douglassville, PA: 16 Wafer Lights Replace Two Chandeliers
- More jobs by Mike V.
- Our electrical services
- Contact Thomas Edison Electric



