By Jason Z., Service expert Lebanon office
Job at a glance
- Location
- Camp Hill, PA
- Service
- Panel Replacement
- When
- September 2026
- Service expert
- Jason Z.
- Called about
- items an inspector had flagged
- Service size
- 200 amp
- Panel brand
- Siemens
- Visits
- 3
- Options offered
- 2
- Inspection
- Passed
What this type of job typically costs
$7,425 to $11,875
Panel replacement, everything on the job
From 856 jobs we completed in the last 18 months.
The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.
Range updated November 10, 2026.
About this service →A Camp Hill client contacted Thomas Edison Electric after a home inspector flagged electrical concerns in their recently purchased 1960s home. The client wanted a 200 amp upgrade and a full assessment of the home's electrical safety.
The client's problem
The client had just purchased a home built in 1960 and knew the electrical system needed updating. A home inspector had flagged items of concern, and the client was experiencing voltage drop issues where lights would fade when high draw appliances like the washer, dryer, and microwave were running.
What our service expert found
The service expert inspected the main electrical service and found rust and corrosion inside the equipment, which is common in panels from this era. The original dryer line still used cloth insulation, a material that degrades over time and poses a fire risk. These conditions indicated the entire service needed replacement to bring the home up to modern safety standards and handle current electrical demands.
Options we presented
The team presented two options for the upgrade. One included the full panel replacement with surge protection and grounding, while the other added a dedicated 30 amp dryer line to replace the outdated cloth wiring.
40-Space 200-Amp Siemens Panel with Meter, SEU, Whole House Surge Protection and Grounding System, dedicated dryer line 30 amp line (the client chose this one)
40-Space 200-Amp Siemens Panel with Meter, SEU, Whole House Surge Protection and Grounding System
The solution
The client chose the comprehensive option that included the dedicated dryer line. The team installed a new 40 space 200 amp Siemens main breaker panel, replaced the meter base and outdoor disconnect, ran new service entrance cable with a new mast, installed a full grounding system, added whole house surge protection, ran a dedicated 240 volt 30 amp circuit for the dryer, and installed a new GFCI receptacle. The work required three visits, including a return trip to address a tripping kitchen circuit and complete final details. The installation passed inspection.
Work performed
Installed 40 space 200 amp Siemens main breaker panel
Replaced 200 amp service mast with new SEU cable, meter base, and outdoor disconnect
Installed full grounding system
Added whole house surge protection device
Ran dedicated 240 volt 30 amp circuit for dryer
Installed GFCI receptacle
Completed warranty callback to address tripping kitchen circuit and finish cleanup
What we installed
- Siemens BR 15 Amp Single Pole Breaker× 12
- Siemens BR Q120 20 Amp Single Pole Breaker× 12
- Mulberry 76401, 1G Decora Semi Gloss White Metal Plate
- Pass & Seymour 1597-TRW 15A 125V Self-Test GFCI Tamper-Resistant, White Outlet
- Siemens BR 20 Amp 2 Pole Breaker
- Siemens BR 30 Amp 2 Pole Breaker
- Siemens BR 50 Amp 6 AWG 2 Pole Breaker
- Siemens ec3gb212 21-Position Ground Bar Kit
- Eaton CHSPT2ULTRA Type 1 Surge Protective Device
- Acorn Clamp 5 and 8 Acorn Direct Burial Bronze Ground Rod Clamp× 2
- Ground Clamp Aluminum 1 and 2 to 1"
- Intersystem Bonding Grounding Bridge - ARLGB5
Why pricing varies
No two homes are wired the same. On this job, the price came down to:
- Service size and whether the main breaker rating changes
- Condition of the existing enclosure, bus bars and breakers
- Grounding and bonding that must be brought up to current code at the same time
- Service entrance conductors and the meter can, when they are part of the scope
- Utility coordination and permit requirements in the jurisdiction
- Surge, AFCI and GFCI protection added during the changeout
- Panel brand and breaker selection
- Accessibility of the panel location and any drywall or masonry work around it
- Code corrections found once the deadfront is off
A service expert prices your job after seeing it, and you approve the price before any work starts.
Why it matters in Camp Hill
Many homes in Camp Hill and throughout Cumberland County were built in the 1950s and 1960s with electrical systems designed for far fewer appliances and lower power demands. Upgrading to 200 amp service with modern grounding and surge protection helps these older homes safely handle today's electrical loads. Replacing deteriorated cloth wiring on major circuits like dryers also reduces fire risk significantly.
Common questions
Why would a home inspector flag an older electrical panel?
Inspectors look for signs of wear, corrosion, outdated wiring, and insufficient capacity. Panels from the 1960s often show rust, use obsolete materials like cloth insulated wiring, and may not provide enough amperage for modern appliances and electronics.
What is a full grounding system and why do I need one?
A grounding system provides a safe path for electrical current to flow into the earth if there is a fault. Older homes often lack proper grounding, which increases the risk of electrical shock and fire. Modern electrical codes require adequate grounding for safety.
Why would lights dim when I run large appliances?
This voltage drop typically indicates that the electrical service cannot handle the combined load of multiple high draw appliances. It often points to an undersized panel, deteriorated wiring, or problems with the service entrance equipment.
What does whole house surge protection do?
A whole house surge protector installed at the panel helps shield your home's electrical system and connected devices from power surges. These surges can come from lightning, utility switching, or large appliances cycling on and off, and can damage sensitive electronics over time.
Project photos
The service expert on this job
Jason Z.
Service expert
Jason is a service expert with Thomas Edison Electric. He has completed more than 2,400 jobs for clients in Berks, Dauphin and Lebanon counties. His most common calls are troubleshooting, outlets and switches, panel upgrades and lighting and ceiling fans.
More about Jason →Reviewed by a licensed Thomas Edison Electric service expert on November 9, 2026.
Where this job was
Camp Hill, Pennsylvania, in Cumberland. Electrical service in Camp Hill
Related
- More panel upgrade case studies
- Panel Replacement: how we do this job
- More jobs from the Lebanon office
- Electrical service in Camp Hill
- Main Breaker Failed and the Power Went Out in Springfield, PA: 200 Amp Panel and Service Upgrade
- 200 Amp Panel and Service Upgrade in Allentown, PA
- More jobs by Jason Z.
- Our electrical services
- Contact Thomas Edison Electric




