By Jason Z., Service expert Lebanon office
Job at a glance
- Location
- Jonestown, PA
- Service
- Panel Replacement
- When
- September 2026
- Service expert
- Jason Z.
- Called about
- outlets that had stopped working
- Service size
- 200 amp
- Panel brand
- Siemens
- Visits
- 2
- Options offered
- 2
- Inspection
- Passed
What this type of job typically costs
$7,425 to $11,875
Panel replacement, everything on the job
From 856 jobs we completed in the last 18 months.
The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.
Range updated November 10, 2026.
About this service →A Jonestown, Pennsylvania client called about outlets that had stopped working in their recently purchased home. A previous electrical contractor had installed switches that no longer functioned, and that contractor refused to return to address the issue.
The client's problem
The client noticed that outlets and switches in the kitchen had stopped working after another contractor had recently done electrical work. They also needed a bathroom light fixture installed.
What our service expert found
When the service expert opened the main electrical panel to inspect it, water poured out from the main breaker. The panel showed rust and corrosion inside the equipment along with clear signs of water intrusion, creating a serious safety hazard that required immediate attention.
Options we presented
The service expert presented two options for replacing the compromised electrical service. Both included a 40 space 200 amp Siemens panel with meter replacement, whole house surge protection, and a grounding system, with one option adding a PVC conduit riser for extra protection on the service entrance cable.
40-Space 200-Amp Siemens Panel with Meter, SEU riser in pvc conduit, Whole House Surge Protection and Grounding System - Copy (the client chose this one)
40-Space 200-Amp Siemens Panel with Meter, SEU, Whole House Surge Protection and Grounding System
The solution
The client chose the option with the PVC conduit riser for added protection. The team returned the next day and installed the new 40 space 200 amp Siemens panel with built in surge protection, replaced the meter and service entrance mast with an outdoor disconnect, and completed the full grounding system. They also troubleshot the non working stairway light and kitchen circuits, installed a junction box and the bathroom light fixture the client had purchased, and ran a new jumper line for the hallway light.
Work performed
Installed 40 space 200 amp Siemens main breaker panel
Replaced 200 amp service mast with new meter base and outdoor disconnect
Installed SEU riser in 2 inch PVC conduit for weather protection
Added whole house surge protective device
Completed full grounding system
Troubleshot and repaired non working switches and outlets
Installed single gang cut in box and client provided bathroom light fixture
Ran 10 foot jumper line for hallway light
What we installed
- Mulberry 76401, 1G Decora Semi Gloss White Metal Plate
- Pass & Seymour 1597-TRW 15A 125V Self-Test GFCI Tamper-Resistant, White Outlet
- Siemens BR 15 Amp Single Pole Breaker× 12
- Siemens BR Q120 20 Amp Single Pole Breaker× 12
- Siemens BR 20 Amp 2 Pole Breaker
- Siemens BR 30 Amp 2 Pole Breaker
- Siemens BR 50 Amp 6 AWG 2 Pole Breaker
- Siemens ec3gb212 21-Position Ground Bar Kit
- Eaton CHSPT2ULTRA Type 1 Surge Protective Device
- Acorn Clamp 5 and 8 Acorn Direct Burial Bronze Ground Rod Clamp× 2
- Ground Clamp Aluminum 1 and 2 to 1"
- Intersystem Bonding Grounding Bridge - ARLGB5
Why pricing varies
No two homes are wired the same. On this job, the price came down to:
- Service size and whether the main breaker rating changes
- Condition of the existing enclosure, bus bars and breakers
- Grounding and bonding that must be brought up to current code at the same time
- Service entrance conductors and the meter can, when they are part of the scope
- Utility coordination and permit requirements in the jurisdiction
- Surge, AFCI and GFCI protection added during the changeout
- Panel brand and breaker selection
- Accessibility of the panel location and any drywall or masonry work around it
- Code corrections found once the deadfront is off
A service expert prices your job after seeing it, and you approve the price before any work starts.
Why it matters in Jonestown
Older homes in Lebanon County can develop water intrusion issues in electrical equipment, especially when panels are mounted on exterior walls or near roof lines. Rust and corrosion inside a panel compromise the connections that protect circuits throughout the house. Replacing damaged equipment with modern components and proper weatherproofing helps prevent electrical failures and fire hazards.
Common questions
How does water get inside an electrical panel?
Water can enter through gaps around the service entrance cable, deteriorated weatherheads, or cracks in the panel enclosure. Over time, even small amounts of moisture cause rust and corrosion that damage breakers and connections.
Why would outlets stop working if the panel has water damage?
Corrosion on breaker connections can cause intermittent or complete loss of power to circuits. Rust buildup prevents proper electrical contact, which means circuits may work inconsistently or fail entirely.
What is the purpose of PVC conduit on the service entrance?
PVC conduit protects the service entrance cable from weather, physical damage, and UV exposure. It provides an extra layer of protection that helps prevent future water intrusion into the electrical equipment.
Why is an outdoor disconnect switch installed with a new panel?
An outdoor disconnect allows utility workers and emergency responders to shut off power to the home without entering the building. Current electrical codes require this safety feature for new service installations.
Project photos
The service expert on this job
Jason Z.
Service expert
Jason is a service expert with Thomas Edison Electric. He has completed more than 2,400 jobs for clients in Berks, Dauphin and Lebanon counties. His most common calls are troubleshooting, outlets and switches, panel upgrades and lighting and ceiling fans.
More about Jason →Reviewed by a licensed Thomas Edison Electric service expert on November 9, 2026.
Where this job was
Jonestown, Pennsylvania, in Lebanon. Electrical service in Jonestown
Related
- More panel upgrade case studies
- Panel Replacement: how we do this job
- More jobs from the Lebanon office
- Electrical service in Jonestown
- Main Breaker Failed and the Power Went Out in Springfield, PA: 200 Amp Panel and Service Upgrade
- 200 Amp Panel and Service Upgrade in Allentown, PA
- More jobs by Jason Z.
- Our electrical services
- Contact Thomas Edison Electric



