Open Now

200 Amp Panel and Service Upgrade in Nazareth, PA

Nazareth, PA Job done August 2026 Service Entrance and Meter Replacement

Water intrusion caused corrosion in this Nazareth home's electrical equipment. The team replaced the service entrance, panel, and grounding system.

Electrical panel installation with breakers, yellow and black wire connections, mounted on plywood backing in basement area in Nazareth, PA
Steven P.

By Steven P., Service expert Allentown office

Job at a glance

Location
Nazareth, PA
Service
Service Entrance and Meter Replacement
When
August 2026
Service expert
Steven P.
Called about
losing power to all or part of the home
Service size
200 amp
Panel brand
Square D
Visits
1
Options offered
2
Inspection
Passed

What this type of job typically costs

$8,975 to $12,850

Full service upgrade (panel, meter, mast)

From 566 jobs we completed in the last 18 months.

The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.

Range updated November 10, 2026.

About this service →
Before
Main electrical panel with breakers and wiring installed in basement wall in Nazareth, PA
After
Electrical panel installation with breakers, yellow and black wire connections, mounted on plywood backing in basement area in Nazareth, PA

A Nazareth, Pennsylvania client contacted Thomas Edison Electric after losing power to part of their home. The property is a double home where the client and their spouse live on one side, with grandparents on the other side.

The client's problem

The client experienced popping sounds and flickering lights, and eventually the entire home lost power when using the microwave. They were concerned about the source of the electrical failure and wanted the issue identified and corrected.

What our service expert found

The service expert discovered rust and corrosion inside the electrical equipment, along with clear signs of water intrusion into the service entrance and panel. Water had been entering through the exterior electrical line, pooling and causing significant damage that made the existing equipment unsafe and unreliable.

Main electrical panel with breakers, disconnect switch, and service entrance components showing dust accumulation in Nazareth, PA
Finding 1
Main electrical panel with breakers and wire connections during installation or service work in Nazareth, PA
Finding 2
Main electrical panel with circuit breakers, disconnect switch, and wiring connections showing dust accumulation in Nazareth, PA
Finding 3
Electrical panel installation mounted on plywood backing in basement with yellow and black wiring visible above in Nazareth, PA
Finding 4

Options we presented

The service expert presented two options: an Ideal solution that included a complete service entrance replacement with full grounding and surge protection, and a Should option that addressed the immediate concerns.

  • Ideal (the client chose this one)

  • Should

The solution

The client chose the Ideal option for a comprehensive upgrade. The team installed a new 200 amp service mast using PVC conduit to prevent future water intrusion, along with a new meter base and outdoor disconnect. They replaced the damaged panel with a Square D Homeline 200 amp main breaker panel with 40 spaces and 80 circuits, installed a complete grounding system, and added a whole house surge protector. The work was completed in a single visit and passed inspection.

Work performed

  • Installed new 200 amp service mast with PVC conduit to prevent water intrusion

  • Replaced meter base and installed outdoor disconnect

  • Installed Square D 200 amp outdoor breaker enclosure

  • Replaced damaged panel with Square D Homeline 200 amp main breaker panel with 40 spaces and 80 circuits

  • Installed complete grounding system

  • Added Square D 25 kA whole house surge protector

What we installed

  • PVC 2" Conduit SCH 40× 20
  • PVC 2" TA
  • Porcelain Cat Eye, Topaz 1003
  • XHHW - 4 and 0 Black Stranded AL Aluminum× 90
  • Milbank Square Hub Bolt On 2" 4 Bolts 200 Amp
  • Conduit Mast and Service Entrance Head 2" PVC
  • Ringless 200 Amp Meter Socket Overhead
  • Eaton ECCVH200R 200 Amp Breaker Enclosure
  • Acorn Clamp 5 and 8 Acorn Direct Burial Bronze Ground Rod Clamp× 2
  • Ground Clamp Aluminum 1 and 2 to 1"
  • Intersystem Bonding Grounding Bridge - ARLGB5
  • Ground Rod 5 and 8" Copper× 2

Why pricing varies

No two homes are wired the same. On this job, the price came down to:

  • Overhead versus underground service and the length of the run
  • Meter can, weatherhead and mast condition
  • Conductor size required for the service rating
  • Utility disconnect and reconnect scheduling
  • Grounding electrode system and bonding corrections
  • Permit and inspection requirements in the jurisdiction
  • Whether the panel is replaced in the same visit

A service expert prices your job after seeing it, and you approve the price before any work starts.

Why it matters in Nazareth

Older homes in Northampton County often have service entrances that have weathered decades of Pennsylvania seasons, making them vulnerable to water intrusion and corrosion. When moisture reaches electrical equipment, it creates serious safety hazards and can cause unpredictable power failures. Replacing compromised service entrance components with modern, weather resistant materials protects the home and provides reliable power for years to come.

Common questions

How does water get into electrical equipment?

Water typically enters through deteriorated seals around the service mast, conduit connections, or meter base. Over time, weather exposure breaks down these seals, allowing moisture to travel down into panels and enclosures where it causes corrosion and damage.

Why use PVC conduit for the service entrance?

PVC conduit resists corrosion and provides better protection against moisture intrusion compared to metal conduit. It also does not rust over time, making it a durable choice for exterior electrical installations exposed to weather.

Can corroded electrical components be reused after drying out?

No, electrical components that have been exposed to water and show signs of corrosion should be replaced. Corrosion compromises the integrity of connections and can create ongoing safety hazards even after the equipment appears dry.

Why is a whole house surge protector recommended with a new panel?

A whole house surge protector guards all circuits against voltage spikes from lightning, utility switching, and other sources. Installing it during a panel replacement ensures the new equipment and connected devices are protected from the start.

Project photos

Electrical panel interior showing corrosion and rust damage on mounting surface and components in Nazareth, PA
Steven P.

The service expert on this job

Steven P.

Service expert

Steven is a service expert with Thomas Edison Electric. He has completed more than 400 jobs for clients in Philadelphia, Bucks and Montgomery counties. His most common calls are lighting and ceiling fans, outlets and switches, troubleshooting and panel upgrades.

More about Steven →

Reviewed by a licensed Thomas Edison Electric service expert on November 9, 2026.

Where this job was

Nazareth, Pennsylvania, in Northampton. Electrical service in Nazareth

Related

Need the same kind of help at home?

Book online or call us 24/7. A service expert will look at your system and walk you through your options.

The Thomas Edison Electric office team and electricians together

Careers at Thomas Edison Electric

Here We Grow Again...

Like what you see? We are always looking for great new team members.

See Our Openings