Open Now

200 Amp Panel Replacement in Breinigsville, PA

Breinigsville, PA Job done October 2026 Panel Replacement

A Breinigsville home with dead outlets needed a full panel replacement after the service expert found failed breakers and multiple safety hazards.

Electrical outlet box with wiring and components installed in wall during rough-in phase in Breinigsville, PA
Mike V.

By Mike V., Service expert Allentown office

Job at a glance

Location
Breinigsville, PA
Service
Panel Replacement
When
October 2026
Service expert
Mike V.
Called about
outlets that had stopped working
Service size
200 amp
Panel brand
Siemens
Visits
2
Options offered
3
Inspection
Passed

What this type of job typically costs

$7,425 to $11,875

Panel replacement, everything on the job

From 856 jobs we completed in the last 18 months.

The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.

Range updated November 10, 2026.

About this service →
Before
Interior room with drop ceiling, outlet box visible, wood-look flooring, and furniture placement during renovation in Breinigsville, PA
After
Interior room with drywall ceiling, exposed beams, and white outlet box installed on wall during construction in Breinigsville, PA

A Breinigsville client contacted Thomas Edison Electric after several outlets in their home had stopped working. The service expert arrived to diagnose the issue and evaluate the overall electrical system.

The client's problem

The client noticed that multiple outlets throughout their home were no longer functioning, which prompted them to seek professional help.

What our service expert found

The service expert discovered a failed breaker in the panel, which explained the dead outlets. Further inspection revealed a panel over 40 years old with signs of overheating and surging on the main bus bar, along with multiple defective breakers throughout. The home had no surge protection, no GFCI protection in the kitchen for counter circuits, and several receptacles were loose or falling out of the walls, creating arcing and shock hazards. The grounding system was also outdated.

Interior wall with outlet box installed, light fixture visible above, white baseboard trim and light wood flooring in Breinigsville, PA
Finding 1
Interior room with drop ceiling, outlet box visible, wood-look flooring, and furniture placement during renovation in Breinigsville, PA
Finding 2
Circuit breaker panel with multiple breakers installed, red and black wiring visible, work in progress in Breinigsville, PA
Finding 3
Electrical outlet box with wiring and components installed in wall during rough-in phase in Breinigsville, PA
Finding 4

Options we presented

The service expert presented three options ranging from a basic panel replacement to a complete panel replacement with a full re-device of the home. A middle option included the panel replacement along with targeted receptacle replacements to address the most pressing safety concerns.

  • Recommended: 30 Space Siemens Panel Replacement with receptacle replacement (the client chose this one)

  • Ideal : panel replacement, and complete re-device of home

  • 30 Space Siemens Panel Replacement

The solution

The client chose the panel replacement with receptacle replacement option. The team installed a new 30-space Siemens PN Series Load Center with a 200 amp main breaker and copper bussing. They added a whole-panel surge protective device to guard against power surges. Throughout the living room area, the team replaced receptacles with tamper-resistant versions and installed new cut-in boxes where receptacles had been falling out of the walls. In the kitchen, they installed a tamper-resistant GFCI receptacle to provide proper protection for counter circuits. The team also replaced a surface light fixture and installed a new carbon and smoke detector with a 10-year battery.

Work performed

  • Installed 30-space Siemens 200 amp main breaker panel with copper bussing

  • Added whole-panel surge protective device

  • Replaced receptacles with tamper-resistant versions in living room area

  • Installed new cut-in boxes for receptacles that were falling out of walls

  • Installed tamper-resistant GFCI receptacle in kitchen

  • Replaced surface light fixture

  • Replaced carbon and smoke detector with 10-year battery unit

What we installed

  • Siemens BR 15 Amp Single Pole Breaker× 10
  • Siemens BR Q120 20 Amp Single Pole Breaker× 10
  • Siemens BR 20 Amp 2 Pole Breaker
  • Siemens BR 30 Amp 2 Pole Breaker
  • Siemens BR 50 Amp 6 AWG 2 Pole Breaker
  • Siemens ec3gb212 21-Position Ground Bar Kit
  • Siemens Type PN 30 Space 100 Amp Main Breaker Panel
  • Siemens QSPD2A065P Whole-Panel Surge Protective Device
  • Mulberry 76401, 1G Decora Semi Gloss White Metal Plate× 12
  • Pass & Seymour 885-TRW Decorator Tamper-Resistant Duplex Receptacle, 15 Amp, 125 Volt - White× 8
  • Pass & Seymour S1-22-W Single Gang, Old Work Deep Remodeler Box 22 cu.in 1-Gang× 4
  • Pass & Seymour 1597-TRW 15A 125V Self-Test GFCI Tamper-Resistant, White Outlet× 4

Why pricing varies

No two homes are wired the same. On this job, the price came down to:

  • Service size and whether the main breaker rating changes
  • Condition of the existing enclosure, bus bars and breakers
  • Grounding and bonding that must be brought up to current code at the same time
  • Service entrance conductors and the meter can, when they are part of the scope
  • Utility coordination and permit requirements in the jurisdiction
  • Surge, AFCI and GFCI protection added during the changeout
  • Panel brand and breaker selection
  • Accessibility of the panel location and any drywall or masonry work around it
  • Code corrections found once the deadfront is off

A service expert prices your job after seeing it, and you approve the price before any work starts.

Why it matters in Breinigsville

Homes in Breinigsville and throughout Lehigh County often date back several decades, and aging electrical panels can develop hidden problems that affect daily convenience and safety. Failed breakers and loose receptacles create fire and shock risks that worsen over time. Upgrading to a modern panel with surge protection and proper GFCI coverage helps protect both the home and the family living in it.

Common questions

Why would a failed breaker cause outlets to stop working?

Breakers control the flow of electricity to specific circuits in your home. When a breaker fails, it can no longer deliver power to the outlets on that circuit, causing them to go dead even though the outlets themselves may be fine.

What is the purpose of a whole-panel surge protective device?

A whole-panel surge protector guards your entire electrical system against voltage spikes from lightning, utility switching, or large appliances cycling on and off. It helps protect sensitive electronics and appliances throughout your home from damage caused by sudden power surges.

Why do receptacles need GFCI protection in kitchens?

Kitchens have water sources near electrical outlets, which increases the risk of shock. GFCI receptacles detect imbalances in electrical current and shut off power almost instantly, helping prevent serious injury in wet or damp locations.

What causes receptacles to fall out of walls?

Over time, the electrical boxes holding receptacles can loosen or deteriorate, especially in older homes. Repeated use of outlets can also stress the mounting points. Installing new cut-in boxes provides a secure anchor for the receptacles and eliminates potential arcing hazards.

Project photos

Interior room with outlet box installed in wall, window with exterior view, and fabric items on floor in Breinigsville, PA
Kitchen countertop with outlet installation and electrical equipment setup during work in Breinigsville, PA
Interior wall with electrical outlet installed above wood-look baseboard trim in residential space in Breinigsville, PA
Kitchen backsplash installation in progress with mixed tile and metal materials, electrical outlets visible in wall in Breinigsville, PA
Hallway with recessed lighting fixture, thermostat, and electrical outlet installed on wall with vertical paneling in Breinigsville, PA
Empty room corner with drywall, baseboard, and outlet box installed on wall in Breinigsville, PA
Main electrical panel installed in wall with circuit breakers, wiring, and conduit connections visible in Breinigsville, PA

Filmed on the job

Watch the walkthrough

Mike V. filmed this on the job in Breinigsville, so you can see what we found and what the work involved.

Mike V.

The service expert on this job

Mike V.

Service expert

More about Mike →

Reviewed by a licensed Thomas Edison Electric service expert on November 9, 2026.

Where this job was

Breinigsville, Pennsylvania, in Lehigh. Electrical service in Breinigsville

Related

Need the same kind of help at home?

Book online or call us 24/7. A service expert will look at your system and walk you through your options.

The Thomas Edison Electric office team and electricians together

Careers at Thomas Edison Electric

Here We Grow Again...

Like what you see? We are always looking for great new team members.

See Our Openings