Open Now

200 Amp Panel and Service Upgrade in Easton, PA

Easton, PA Job done October 2026 Panel Replacement

First time homeowners in Easton discovered a corroded 1950s panel. The team installed a 200 amp service with surge protection and full grounding.

Main electrical panel with multiple circuit breakers and wiring during installation or service work in Easton, PA
Mike V.

By Mike V., Service expert Allentown office

Job at a glance

Location
Easton, PA
Service
Panel Replacement
When
October 2026
Service expert
Mike V.
Called about
a problem with the electrical panel
Service size
200 amp
Panel brand
Siemens
Visits
2
Options offered
3
Inspection
Passed

What this type of job typically costs

$7,425 to $11,875

Panel replacement, everything on the job

From 856 jobs we completed in the last 18 months.

The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.

Range updated November 10, 2026.

About this service →
Before
Main electrical panel with multiple circuit breakers and wiring during installation or service work in Easton, PA
After
Open electrical panel with circuit breakers and wiring installed on basement wall in Easton, PA

A client in Easton, Pennsylvania contacted Thomas Edison Electric about a problem with their electrical panel. They had recently purchased a 1953 home and wanted to address the panel before starting a kitchen renovation.

The client's problem

The client noticed their home had a very old electrical panel and wanted to update it before beginning renovation work. As first time homeowners, their primary concern was safety.

What our service expert found

The service expert found a 55 plus year old hundred amp main panel with water damage and corrosion inside multiple circuit breakers and wiring. There were signs of overheating and over surging on the main bus bar, which indicated electricity was arcing or pulling more current than the metal could safely handle. The inspection also revealed an outdated grounding system and a Push Matic sub panel in the basement fed with cloth wiring, with exposed wire running through the finished garage. An overloaded circuit was also identified. These conditions presented both electrical shock and fire hazards, as corroded breakers often fail to trip during overloads, allowing wires to heat up dangerously.

Interior view of electrical panel with multiple circuit breakers, wiring, and terminal connections showing dust accumulation in Easton, PA
Finding 1
Electrical panel with multiple circuit breakers, wiring, and a range breaker visible in the center in Easton, PA
Finding 2
Circuit breaker panel with multiple breakers and terminal block connections visible in Easton, PA
Finding 3
Circuit breaker panel with multiple breakers stacked vertically, red and black test leads connected in Easton, PA
Finding 4
Electrical panel installation in garage with exposed wiring and conduit connections to overhead track in Easton, PA
Finding 5
Gutter and downspout installation with mounting bracket and fastener visible on exterior soffit area in Easton, PA
Finding 6
Electrical panel interior showing breakers, wiring, and connections during installation or service work in Easton, PA
Finding 7
Electrical panel with multiple circuit breakers and wiring installed in wall opening during residential work in Easton, PA
Finding 8
Electrical panel with multiple circuit breakers and wiring during installation or service work in Easton, PA
Finding 9
Fused disconnect switch panel with four cartridge fuses and colored wire connections installed on wooden backing in Easton, PA
Finding 10
Basement work area with electrical panels, conduit routing, fire extinguisher, and concrete block walls in Easton, PA
Finding 11
Open electrical panel with multiple circuit breakers and wiring during installation or service work in Easton, PA
Finding 12

Options we presented

The service expert presented three options to address the safety concerns and support the home's future electrical needs.

  • 100 Amp 30-Space Siemens Panel & Meter with Surge Protection

  • 40-Space 200-Amp Siemens Panel with Meter, SEU, Whole House Surge Protection and Grounding System

  • 40-Space 200-Amp Siemens Panel with Meter, PVC Mast with Main Breaker Disconnect, Whole House Surge Protection and Grounding System (the client chose this one)

The solution

The client chose the 40 space 200 amp Siemens panel with meter, PVC mast with main breaker disconnect, whole house surge protection, and grounding system. The team installed a new 200 amp Siemens load center with 40 breaker spaces, replaced the meter base, and installed a PVC mast for overhead service with an outdoor disconnect. They added a complete grounding system to meet current electrical codes and installed a whole house surge protective device. A 100 amp sub panel was installed in the basement with new SER cable run in concealed areas to replace the hazardous cloth wiring. The team also installed a GFCI receptacle and completed circuit rerouting work. The project required two visits and passed inspection.

Work performed

  • Installed 40 space 200 amp Siemens main breaker panel

  • Replaced meter base and installed PVC service mast with outdoor disconnect

  • Installed 30 space 100 amp Siemens sub panel in basement

  • Ran SER cable in concealed area to replace cloth wiring

  • Installed complete grounding system

  • Added whole house surge protective device

  • Installed GFCI receptacle

  • Rerouted and traced circuits

What we installed

  • Siemens BR 15 Amp Single Pole Breaker× 22
  • Siemens BR Q120 20 Amp Single Pole Breaker× 22
  • Siemens BR 20 Amp 2 Pole Breaker× 2
  • Siemens BR 30 Amp 2 Pole Breaker× 2
  • Siemens BR 50 Amp 6 AWG 2 Pole Breaker× 2
  • Mulberry 76401, 1G Decora Semi Gloss White Metal Plate
  • Pass & Seymour 1597-TRW 15A 125V Self-Test GFCI Tamper-Resistant, White Outlet
  • Siemens ec3gb212 21-Position Ground Bar Kit× 2
  • PVC 2" Conduit SCH 40× 20
  • PVC 2" TA
  • Porcelain Cat Eye, Topaz 1003
  • XHHW - 4 and 0 Black Stranded AL Aluminum× 90

Why pricing varies

No two homes are wired the same. On this job, the price came down to:

  • Service size and whether the main breaker rating changes
  • Condition of the existing enclosure, bus bars and breakers
  • Grounding and bonding that must be brought up to current code at the same time
  • Service entrance conductors and the meter can, when they are part of the scope
  • Utility coordination and permit requirements in the jurisdiction
  • Surge, AFCI and GFCI protection added during the changeout
  • Panel brand and breaker selection
  • Accessibility of the panel location and any drywall or masonry work around it
  • Code corrections found once the deadfront is off

A service expert prices your job after seeing it, and you approve the price before any work starts.

Why it matters in Easton

Homes built in the 1950s in Easton and throughout Northampton County often have original electrical systems that were never designed for modern electrical loads. Water intrusion and decades of use can cause hidden corrosion that prevents breakers from functioning safely. Upgrading to a properly sized panel with modern surge protection and grounding helps protect both the home and the appliances inside it.

Common questions

Why is corrosion inside an electrical panel dangerous?

Corrosion creates high resistance that generates heat and can cause arcing. Corroded breakers may fail to trip during an overload, allowing wires to overheat and potentially start a fire. It also increases the risk of electrical shock.

What is a main breaker disconnect and why would I need one?

A main breaker disconnect is an outdoor switch that allows the power to be shut off before it enters the home. It provides an additional safety point for utility workers and emergency responders and is often required for certain service configurations.

Why was a sub panel installed in addition to the main panel?

A sub panel distributes power to a specific area of the home, such as a basement, without overloading the main panel. It also allowed the team to replace hazardous old wiring that was feeding the original sub panel with safe, modern cable.

What does a whole house surge protector do?

A whole house surge protector is installed at the main panel and helps absorb voltage spikes before they reach your appliances and electronics. It provides a layer of protection against surges from lightning, utility switching, and other sources.

Project photos

Utility meter and electrical disconnect box installed on exterior wall with conduit and wiring connections in Easton, PA
Installed electrical disconnect box with Eaton breaker, red and black service cables, and white conduit on house exterior in Easton, PA
Main electrical panel with circuit breakers and service entrance cables installed in residential home in Easton, PA
Open electrical panel with circuit breakers labeled for various outlets and appliances including surge protector, dryer, and stove connections in Easton, PA
Interior view of electrical panel showing terminal connections with red and black wires attached to lugs, with instruction label visible on side wall in Easton, PA
Red-handled electrical tools and white conduit fittings arranged on gray work surface with packaging visible in Easton, PA
Electrical service panel and meter installation on house exterior with conduit routing to roof in Easton, PA
Mike V.

The service expert on this job

Mike V.

Service expert

More about Mike →

Reviewed by a licensed Thomas Edison Electric service expert on November 9, 2026.

Where this job was

Easton, Pennsylvania, in Northampton. Electrical service in Easton

Related

Need the same kind of help at home?

Book online or call us 24/7. A service expert will look at your system and walk you through your options.

The Thomas Edison Electric office team and electricians together

Careers at Thomas Edison Electric

Here We Grow Again...

Like what you see? We are always looking for great new team members.

See Our Openings