By Artur M., Service expert Allentown office
Job at a glance
- Location
- Allentown, PA
- Service
- Panel Replacement
- When
- August 2026
- Service expert
- Artur M.
- Called about
- replacing older wiring
- Service size
- 200 amp
- Panel brand
- Siemens
- Visits
- 1
- Options offered
- 3
- Inspection
- Passed
What this type of job typically costs
$7,425 to $11,875
Panel replacement, everything on the job
From 856 jobs we completed in the last 18 months.
The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.
Range updated November 10, 2026.
About this service →
A client in Allentown, Pennsylvania contacted Thomas Edison Electric about replacing older wiring throughout their home. They had noticed flickering fixtures and dimming lights, which prompted their call.
The client's problem
The client was experiencing flickering fixtures and dimming lights throughout their home, indicating issues with their aging electrical system that needed attention.
What our service expert found
The service expert evaluated the home's electrical system and determined that a comprehensive upgrade was needed to address the flickering and dimming issues. The existing infrastructure required not only panel replacement but also updated service entrance equipment and proper grounding to ensure safe, stable power delivery.
Options we presented
The service expert presented three options ranging from a basic panel replacement with surge protection to a complete electrical service upgrade with maximum capacity and safety features.
Panel replacement and surge protector
100 Amp 30-Space Siemens Panel & Meter with Surge Protection
40-Space 200-Amp Siemens Panel with Meter, SEU, Whole House Surge Protection and Grounding System (the client chose this one)
The solution
The client chose the most comprehensive option, a 40-space 200-amp Siemens panel with meter, service entrance upgrade, whole house surge protection, and full grounding system. The team installed the new Siemens 40-space 200-amp main breaker panel along with a new 200-amp service mast, service entrance cable, and meter base with outdoor disconnect. They added an Eaton whole house surge protective device at the service entrance and installed a complete grounding system. The work also included installing a new GFCI receptacle. The project was completed in a single visit and passed inspection.
Work performed
Installed Siemens 40-space 200-amp main breaker panel
Replaced 200-amp service mast with new service entrance cable
Installed new meter base with outdoor disconnect
Added Eaton whole house surge protective device
Installed full grounding system
Installed GFCI receptacle
What we installed
- Mulberry 76401, 1G Decora Semi Gloss White Metal Plate
- Pass & Seymour 1597-TRW 15A 125V Self-Test GFCI Tamper-Resistant, White Outlet
- Siemens BR 15 Amp Single Pole Breaker× 12
- Siemens BR Q120 20 Amp Single Pole Breaker× 12
- Siemens BR 20 Amp 2 Pole Breaker
- Siemens BR 30 Amp 2 Pole Breaker
- Siemens BR 50 Amp 6 AWG 2 Pole Breaker
- Siemens ec3gb212 21-Position Ground Bar Kit
- Acorn Clamp 5 and 8 Acorn Direct Burial Bronze Ground Rod Clamp× 2
- Ground Clamp Aluminum 1 and 2 to 1"
- Intersystem Bonding Grounding Bridge - ARLGB5
- Ground Rod 5 and 8" Copper× 2
Why pricing varies
No two homes are wired the same. On this job, the price came down to:
- Service size and whether the main breaker rating changes
- Condition of the existing enclosure, bus bars and breakers
- Grounding and bonding that must be brought up to current code at the same time
- Service entrance conductors and the meter can, when they are part of the scope
- Utility coordination and permit requirements in the jurisdiction
- Surge, AFCI and GFCI protection added during the changeout
- Panel brand and breaker selection
- Accessibility of the panel location and any drywall or masonry work around it
- Code corrections found once the deadfront is off
A service expert prices your job after seeing it, and you approve the price before any work starts.
Why it matters in Allentown
Older homes in Allentown and throughout the Lehigh Valley often have electrical systems that were not designed for modern power demands. Flickering lights and dimming fixtures can indicate undersized wiring, loose connections, or inadequate grounding, all of which pose safety concerns. A comprehensive panel and service upgrade provides the capacity and protection needed for today's electrical loads while reducing the risk of electrical fires.
Common questions
Why would flickering lights mean I need a panel upgrade?
Flickering and dimming lights often indicate that your electrical system is struggling to meet demand or has loose connections. An aging panel may not distribute power evenly, and upgrading to a modern panel with proper capacity can resolve these issues and improve safety.
What is the benefit of a 40-space panel versus a smaller one?
A 40-space panel provides room for more circuits, which is helpful if you plan to add appliances, electric vehicle charging, or other electrical loads in the future. It also allows for better organization of your home's circuits without overcrowding.
Why is a grounding system important during a panel upgrade?
A proper grounding system provides a safe path for electrical faults to dissipate into the earth, reducing the risk of shock and fire. Many older homes lack adequate grounding, so upgrading the grounding system alongside the panel ensures the entire electrical system meets current safety standards.
What does a whole house surge protector do?
A whole house surge protector installed at the service entrance helps shield your home's electrical system and connected devices from voltage spikes caused by lightning, utility switching, or other events. It provides a first line of defense that complements individual plug-in surge protectors.
The service expert on this job
Artur M.
Service expert
Artur is a service expert with Thomas Edison Electric. He has completed more than 1,100 jobs for clients in Bucks, Philadelphia and Montgomery counties. His most common calls are lighting and ceiling fans, outlets and switches, troubleshooting and panel upgrades.
More about Artur →Reviewed by a licensed Thomas Edison Electric service expert on November 9, 2026.
Where this job was
Allentown, Pennsylvania, in Lehigh. Electrical service in Allentown
Related
- More panel upgrade case studies
- Panel Replacement: how we do this job
- More jobs from the Allentown office
- Electrical service in Allentown
- Dead Outlets Traced to a Corroded Panel in Allentown, PA: 200 Amp Panel and Service Upgrade
- 200 Amp Panel Replacement in Allentown, PA
- More jobs by Artur M.
- Our electrical services
- Contact Thomas Edison Electric



