By Mike V., Service expert Allentown office
Job at a glance
- Location
- Bethlehem, PA
- Service
- Meter Enclosure Repair
- When
- October 2026
- Service expert
- Mike V.
- Called about
- damage to the meter, mast or service cable outside the home
- Service size
- 200 amp
- Visits
- 1
- Options offered
- 3
- Inspection passed
- No
What this type of job typically costs
$8,975 to $12,850
Full service upgrade (panel, meter, mast)
From 566 jobs we completed in the last 18 months.
The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.
Range updated November 10, 2026.
About this service →A Bethlehem client called about exposed wires coming from the meter box outside their home.
The client's problem
The client noticed exposed wiring at the meter box and was concerned about the condition of the electrical equipment on the exterior of the home.
What our service expert found
The service expert found a meter enclosure that was not properly connected to the underground conduit, which had allowed water to enter the electrical system over time. Inside the equipment, there was significant rust and corrosion from moisture exposure. The panel was over 40 years old and showed signs of overheating and over-surging, and the home had no surge protection and outdated grounding.
Options we presented
The service expert presented the client with options ranging from a targeted repair to a full system upgrade with added protection.
Reconnect the existing meter and rewire the meter enclosure to restore a proper connection (the client chose this one)
Replace the panel and meter enclosure with a new 40 space Siemens system
Install an Eaton whole home surge protector rated at 50,000 amp
The solution
The client chose to have the existing meter reconnected and the meter enclosure rewired. The service expert completed the work in a single visit, restoring a proper connection between the meter enclosure and the underground conduit to prevent further water intrusion.
Work performed
Inspected meter enclosure and found disconnection from underground conduit
Identified rust and corrosion from water intrusion inside electrical equipment
Reconnected existing 200 amp meter
Rewired meter enclosure to restore proper support and connection
Sealed connection to underground conduit to prevent future water entry
What we installed
- XHHW - 4/0 Black Stranded AL Aluminum× 24
- Ringless 200 Amp Meter Socket Underground LANUAS877PPZA
Why pricing varies
No two homes are wired the same. On this job, the price came down to:
- Overhead versus underground service and the length of the run
- Meter can, weatherhead and mast condition
- Conductor size required for the service rating
- Utility disconnect and reconnect scheduling
- Grounding electrode system and bonding corrections
- Permit and inspection requirements in the jurisdiction
- Whether the panel is replaced in the same visit
A service expert prices your job after seeing it, and you approve the price before any work starts.
Why it matters in Bethlehem
Older homes in Bethlehem and the Lehigh Valley often have aging meter enclosures and service equipment that can deteriorate over decades of exposure to weather. When water enters electrical equipment, it accelerates corrosion and can create unsafe conditions. Addressing these issues promptly helps protect the home and keeps the electrical system functioning reliably.
Common questions
How does water get inside a meter enclosure?
Water can enter when the connection between the meter enclosure and underground conduit becomes loose or disconnected. Over time, weather exposure and settling can create gaps that allow moisture to seep in and damage internal components.
What problems does water cause in electrical equipment?
Water causes rust and corrosion on metal components, which can lead to poor connections, overheating, and eventual equipment failure. Moisture can also create conditions for electrical arcing, which poses a fire risk.
Should I replace my entire panel if the meter enclosure has water damage?
It depends on the extent of the damage and the age of the equipment. A service expert can assess whether the existing panel is still safe and reliable or whether replacement would be a better long-term solution.
Why is surge protection recommended for older electrical systems?
Older systems often lack modern protective devices, leaving sensitive electronics and appliances vulnerable to power surges from lightning or utility fluctuations. A whole home surge protector helps guard against damage from these events.
The service expert on this job
Mike V.
Service expert
More about Mike →Reviewed by a licensed Thomas Edison Electric service expert on November 18, 2026.
Where this job was
Bethlehem, Pennsylvania, in Lehigh. Electrical service in Bethlehem
Related
- More panel upgrade case studies
- Meter Enclosure Repair: how we do this job
- More jobs from the Allentown office
- Electrical service in Bethlehem
- No Surge Protection in Morrisville, PA: Service Entrance and Meter Replacement
- Dead Circuit Leads to a New Service and Basement Outlets in Fayetteville, PA: 200 Amp Panel and Service Upgrade
- More jobs by Mike V.
- Our electrical services
- Contact Thomas Edison Electric



