By Artur M., Service expert Bensalem office
Job at a glance
- Location
- Bensalem, PA
- Service
- Rewiring
- When
- November 2026
- Service expert
- Artur M.
- Called about
- a circuit that had stopped working
- Panel brand
- Eaton
- Visits
- 3
- Options offered
- 2
- Inspection passed
- No
What this type of job typically costs
$925 to $2,250
Rewiring
From 36 jobs we completed in the last 18 months.
The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.
Range updated November 10, 2026.
A Bensalem client called Thomas Edison Electric about a circuit that had stopped working. The property had also failed an electrical inspection because the bathroom circuit needed to be separated from the kitchen GFCI.
The client's problem
The client had a non-working circuit and needed to address inspection requirements that called for separating the bathroom electrical from the kitchen GFCI circuit.
What our service expert found
The service expert evaluated the apartment's electrical layout and found that significant rewiring was needed. Switches for the bedroom fan and recessed lights needed to be rerouted from an old wall to a new wall, three-way switching was required between the hallway and entrance, and dedicated wiring was needed for the bathroom outlet to meet inspection requirements. The sub panel also required proper ground and neutral separation.
Options we presented
The service expert presented options to address the wiring needs and inspection requirements.
Reroute electrical wiring and install dedicated outlet for the bathroom (the client chose this one)
Essential electrical wiring and dedicated bathroom outlet to meet inspection requirements
The solution
The client chose the recommended electrical wiring package along with new sub panel wiring and surge protection. Over three visits, the team rerouted existing wiring from the old wall to the new wall, including switches for the bedroom fan and bedroom recessed lights. They installed three-way switching between the hallway and entrance and ran dedicated wiring for the bathroom outlet. The crew also installed new sub panel wiring with proper ground and neutral separation and added whole home surge protection using an Eaton panel-mounted surge protective device.
Work performed
Rerouted electrical wiring from old wall to new wall for bedroom fan and recessed light switches
Installed three-way switching between hallway and entrance
Ran dedicated wiring for bathroom outlet
Installed new sub panel wiring with ground and neutral separation
Installed Eaton whole home surge protective device at the panel
Ran service entrance feeder cable up to 50 feet in open area
What we installed
- Custom Part× 3
- Eaton BRNSURGE Surge Protector Type 2 SPD 3 kA
- AL SER 2-2-2-4 Price Per Foot× 50
Why pricing varies
No two homes are wired the same. On this job, the price came down to:
- Surge device type and rating
- Whether the device mounts inside the panel or beside it
- Available breaker positions in the panel
- Panel condition and any corrections found when the cover is removed
- Layered protection at sensitive equipment
- Grounding system condition, which the device depends on
A service expert prices your job after seeing it, and you approve the price before any work starts.
Why it matters in Bensalem
Older homes and apartments in Bucks County often have circuits that share loads in ways that no longer meet current standards. Separating bathroom circuits from kitchen GFCI protection helps prevent nuisance trips and ensures each area has reliable power. Adding whole home surge protection guards sensitive electronics from voltage spikes that can travel through utility lines.
Common questions
Why would a bathroom circuit need to be separated from a kitchen GFCI?
Bathrooms and kitchens both require GFCI protection, but sharing a single GFCI circuit between them can cause nuisance trips when appliances in either room draw power. Separating these circuits ensures each area has dedicated protection and more reliable power.
What does ground and neutral separation mean for a sub panel?
In a sub panel, the ground and neutral wires must be kept on separate bus bars rather than bonded together. This prevents current from traveling on unintended paths, which reduces shock hazards and helps the system operate safely.
What does whole home surge protection do?
A whole home surge protector mounts at the electrical panel and diverts voltage spikes away from your home's circuits. It protects appliances, electronics, and other devices from damage caused by power surges from utility lines or lightning.
Why might rewiring require multiple visits?
Complex rewiring projects often involve planning, running new wires through walls, and installing multiple components. Breaking the work into visits allows the electrician to complete each phase properly and coordinate with the client's schedule.
Project photos
The service expert on this job
Artur M.
Service expert
Artur is a service expert with Thomas Edison Electric. He has completed more than 1,100 jobs for clients in Bucks, Philadelphia and Montgomery counties. His most common calls are lighting and ceiling fans, outlets and switches, troubleshooting and panel upgrades.
More about Artur →Reviewed by a licensed Thomas Edison Electric service expert on November 18, 2026.
Where this job was
Bensalem, Pennsylvania, in Bucks. Electrical service in Bensalem
Related
- More new installation case studies
- More jobs from the Bensalem office
- Electrical service in Bensalem
- Dead Outlets in Newtown, PA: Scorched GFCI Outlets Replaced and New Smoke Detectors
- Rust and Corrosion Inside the Panel in Harrisburg, PA: 200 Amp Panel and Service Upgrade
- More jobs by Artur M.
- Our electrical services
- Contact Thomas Edison Electric




