Open Now

100 Amp Panel and Service Upgrade in Walnutport, PA

Walnutport, PA Job done August 2026 Panel Replacement

After a tree ripped the service connection from this Walnutport home, the team replaced the damaged service and outdated fuse box with a modern panel.

Main electrical panel installed in basement wall with conduit runs and breaker configuration visible during installation in Walnutport, PA
Artur M.

By Artur M., Service expert Allentown office

Job at a glance

Location
Walnutport, PA
Service
Panel Replacement
When
August 2026
Service expert
Artur M.
Called about
losing power to all or part of the home
Service size
100 amp
Panel brand
Siemens
Visits
2
Options offered
4
Inspection
Passed

What this type of job typically costs

$7,425 to $11,875

Panel replacement, everything on the job

From 856 jobs we completed in the last 18 months.

The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.

Range updated November 10, 2026.

About this service →

A Walnutport client called after losing power to most of their home following a severe storm. A fallen tree had pulled the electrical service connection away from the house, leaving only the water heater and stove operational.

The client's problem

The client noticed that nearly all power to the home was out after a tree fell onto the utility service wire. The impact had ripped the service connection away from the building, and the family was left without electricity for most of the house.

What our service expert found

The service expert found that the storm had caused significant damage to the service cable, including cracked and compromised insulation where the tree pulled the connection from the home. During the assessment, the team also discovered the house was still operating on an outdated fuse box with cloth conductors and had an incomplete grounding system that would not pass current inspection requirements. These conditions meant that simply reconnecting the service would not provide a safe or code-compliant installation.

Options we presented

The service expert presented several options ranging from a basic panel and meter replacement with surge protection to more comprehensive packages that included sub panel replacement and additional circuit capacity.

  • 100 Amp 20-Space 40-Circuit Siemens Panel & Meter with Surge Protection (the client chose this one)

  • 100 Amp 20-Space 40-Circuit Siemens Panel & Meter with Surge Protection and Sub Panel replacement

  • 100 Amp 30-Space Siemens Panel & Meter with Surge Protection and Sub Panel replacement

  • 100 Amp 30-Space Siemens Panel & Meter with Surge Protection

The solution

The client chose the 100 amp 20-space 40-circuit Siemens panel and meter with surge protection. The team removed all damaged exterior service wiring and installed new service entrance conductors along with a new exterior meter socket and service disconnect. They replaced the outdated fuse box with the new Siemens panel, installed whole-panel surge protection, and upgraded the grounding and bonding system to meet current requirements. After completing all work, the team tested the system to verify proper operation, and the installation passed electrical inspection.

Work performed

  • Removed storm-damaged exterior service wiring and conductors

  • Installed new service entrance cable with mast and meter base

  • Installed new exterior service disconnect

  • Replaced outdated fuse box with Siemens 100 amp 20-space panel

  • Installed whole-panel surge protective device

  • Upgraded and completed full grounding and bonding system

  • Tested completed system and obtained electrical inspection approval

What we installed

  • Siemens Type PN 20 Space 100 Amp Main Breaker Panel
  • Eaton CHPSURGE Plug on Neutral Surge Protector Type 2 SPD 3 kA
  • Nipple 1 and 2" Rigid Conduit Offset
  • RACO 192, 1900 Box 1-1 and 2D - 1 and 2-3 and 4KO Raised Grnd
  • RACO 808C, 1900 GFCI Cover
  • Eaton TRGF15W 15 Amp 125 VAC GFCI Tamper-Resistant White Outlet
  • Mast and Service Entrance Head 100A SEU PVC660 TOP727 Plastic
  • AL SEU 1 and 0-1 and 0-1 and 0 Price Per Foot× 20
  • Ringless 100 Amp Meter Socket Overhead
  • Acorn Clamp 5 and 8 Acorn Direct Burial Bronze Ground Rod Clamp× 2
  • Ground Clamp Aluminum 1 and 2 to 1"
  • Intersystem Bonding Grounding Bridge - ARLGB5

Why pricing varies

No two homes are wired the same. On this job, the price came down to:

  • Service size and whether the main breaker rating changes
  • Condition of the existing enclosure, bus bars and breakers
  • Grounding and bonding that must be brought up to current code at the same time
  • Service entrance conductors and the meter can, when they are part of the scope
  • Utility coordination and permit requirements in the jurisdiction
  • Surge, AFCI and GFCI protection added during the changeout
  • Panel brand and breaker selection
  • Accessibility of the panel location and any drywall or masonry work around it
  • Code corrections found once the deadfront is off

A service expert prices your job after seeing it, and you approve the price before any work starts.

Why it matters in Walnutport

Homes in Northampton County with older electrical systems are particularly vulnerable when storm damage occurs because repairs often reveal underlying deficiencies that must be corrected. Cloth conductors and fuse boxes were common decades ago but no longer meet safety standards. Upgrading to a modern panel with proper grounding protects the home from future electrical hazards and ensures the system can handle current electrical demands.

Common questions

Why did the whole electrical panel need to be replaced after storm damage?

When storm damage requires replacing the service entrance equipment, inspectors will evaluate the entire electrical system. If the existing panel or wiring does not meet current safety standards, those components must also be updated before the inspection can be approved.

What is wrong with keeping an old fuse box?

Fuse boxes lack the safety features of modern circuit breakers and often cannot handle the electrical demands of today's homes. They also make it difficult to add circuits for new appliances or devices and may not provide adequate protection against electrical fires.

Why is a grounding system important for my electrical panel?

A proper grounding system provides a safe path for electrical current to follow if something goes wrong, reducing the risk of shock and fire. Incomplete or outdated grounding can leave your home vulnerable to damage from electrical faults or lightning strikes.

How does whole-panel surge protection help my home?

Whole-panel surge protection guards your electrical system and connected devices from voltage spikes caused by lightning, utility switching, or other events. It provides a first line of defense that protects appliances, electronics, and wiring throughout the home.

Project photos

Basement electrical installation with gray panel box mounted on wooden backing, pump motor on concrete pad, and blue pressure tank in Walnutport, PA
Open electrical panel box showing fuses, wiring, and internal components mounted on wall in Walnutport, PA
Exterior wall with electrical outlet box and conduit installation during residential work in Walnutport, PA
Two electrical service panels mounted on exterior wall with conduit and wiring connections visible in Walnutport, PA
Artur M.

The service expert on this job

Artur M.

Service expert

Artur is a service expert with Thomas Edison Electric. He has completed more than 1,100 jobs for clients in Bucks, Philadelphia and Montgomery counties. His most common calls are lighting and ceiling fans, outlets and switches, troubleshooting and panel upgrades.

More about Artur →

Reviewed by a licensed Thomas Edison Electric service expert on November 9, 2026.

Where this job was

Walnutport, Pennsylvania, in Northampton. Electrical service in Walnutport

Related

Need the same kind of help at home?

Book online or call us 24/7. A service expert will look at your system and walk you through your options.

The Thomas Edison Electric office team and electricians together

Careers at Thomas Edison Electric

Here We Grow Again...

Like what you see? We are always looking for great new team members.

See Our Openings