By Jason Z., Service expert Lebanon office
Job at a glance
- Location
- Shippensburg, PA
- Service
- Panel Replacement
- When
- October 2026
- Service expert
- Jason Z.
- Called about
- losing power to all or part of the home
- Service size
- 200 amp
- Panel brand
- Siemens
- Visits
- 2
- Options offered
- 2
- Inspection
- Passed
What this type of job typically costs
$7,425 to $11,875
Panel replacement, everything on the job
From 856 jobs we completed in the last 18 months.
The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.
Range updated November 10, 2026.
About this service →
A Shippensburg client called after losing power to their entire home. The utility company had visited and determined the main breaker had no resistance in the panel.
The client's problem
The client noticed their main breaker had tripped and would not turn back on, leaving the home without electricity.
What our service expert found
The service expert found severe rust and corrosion inside the electrical panel. Upon closer inspection, the exterior service cables were also deteriorating, which explained how water had been entering the equipment. The expert noted the client was fortunate the damage had not started a fire, as the combination of corroded cables and internal rust created a serious safety hazard.
Options we presented
The service expert presented two options for restoring safe, reliable power to the home. Both included a full 200 amp service upgrade with surge protection and updated grounding, with one option adding arc fault breakers throughout.
40-Space 200-Amp Siemens Panel with Meter, SEU, Whole House Surge Protection and Grounding System, arc fault breakers
40-Space 200-Amp Siemens Panel with Meter, SEU, Whole House Surge Protection and Grounding System (the client chose this one)
The solution
The client chose the 40 space 200 amp Siemens panel with meter replacement, SEU mast, whole house surge protection, and a full grounding system. The team purchased materials that evening and returned the next morning to complete the work. They installed the new panel, replaced the deteriorated service entrance cables and meter base, added an outdoor disconnect, installed whole house surge protection, and updated the grounding system. A GFCI receptacle was also installed. The work passed inspection and power was fully restored.
Work performed
Installed 40 space 200 amp Siemens main breaker panel
Replaced 200 amp service mast with new SEU cables
Installed new meter base and outdoor disconnect
Added whole house surge protective device
Installed full grounding system
Installed 15 amp GFCI receptacle
What we installed
- Mulberry 76401, 1G Decora Semi Gloss White Metal Plate
- Pass & Seymour 1597-TRW 15A 125V Self-Test GFCI Tamper-Resistant, White Outlet
- Siemens BR 15 Amp Single Pole Breaker× 12
- Siemens BR Q120 20 Amp Single Pole Breaker× 12
- Siemens BR 20 Amp 2 Pole Breaker
- Siemens BR 30 Amp 2 Pole Breaker
- Siemens BR 50 Amp 6 AWG 2 Pole Breaker
- Siemens ec3gb212 21-Position Ground Bar Kit
- Eaton CHSPT2ULTRA Type 1 Surge Protective Device
- Acorn Clamp 5 and 8 Acorn Direct Burial Bronze Ground Rod Clamp× 2
- Ground Clamp Aluminum 1 and 2 to 1"
- Intersystem Bonding Grounding Bridge - ARLGB5
Why pricing varies
No two homes are wired the same. On this job, the price came down to:
- Service size and whether the main breaker rating changes
- Condition of the existing enclosure, bus bars and breakers
- Grounding and bonding that must be brought up to current code at the same time
- Service entrance conductors and the meter can, when they are part of the scope
- Utility coordination and permit requirements in the jurisdiction
- Surge, AFCI and GFCI protection added during the changeout
- Panel brand and breaker selection
- Accessibility of the panel location and any drywall or masonry work around it
- Code corrections found once the deadfront is off
A service expert prices your job after seeing it, and you approve the price before any work starts.
Why it matters in Shippensburg
Older homes in Cumberland County can develop hidden corrosion in electrical panels, especially when weathered service cables allow moisture inside. Rust and corrosion weaken connections and create fire risks that often go unnoticed until a failure occurs. Replacing deteriorated equipment with modern panels, proper grounding, and surge protection helps protect both the home and the appliances inside.
Common questions
How does water get inside an electrical panel?
Water typically enters through deteriorated service entrance cables or damaged weatherheads on the exterior of the home. Once moisture gets in, it causes rust and corrosion on breakers, bus bars, and connections over time.
Why is corrosion in an electrical panel dangerous?
Corrosion weakens electrical connections and can cause arcing, overheating, and potential fires. It also degrades the performance of breakers, which may fail to trip when they should or may not reset properly.
What does a whole house surge protector do?
A whole house surge protector installs at the main panel and diverts voltage spikes away from your home's wiring and appliances. It protects against surges from lightning, utility switching, and other external sources.
Why is a grounding system important during a panel replacement?
A proper grounding system provides a safe path for electrical faults to travel to the earth, reducing shock and fire hazards. When replacing a panel, updating the grounding ensures the new equipment operates safely and meets current standards.
Project photos
The service expert on this job
Jason Z.
Service expert
Jason is a service expert with Thomas Edison Electric. He has completed more than 2,400 jobs for clients in Berks, Dauphin and Lebanon counties. His most common calls are troubleshooting, outlets and switches, panel upgrades and lighting and ceiling fans.
More about Jason →Reviewed by a licensed Thomas Edison Electric service expert on November 9, 2026.
Where this job was
Shippensburg, Pennsylvania, in Cumberland. Electrical service in Shippensburg
Related
- More panel upgrade case studies
- Panel Replacement: how we do this job
- More jobs from the Lebanon office
- Electrical service in Shippensburg
- Main Breaker Failed and the Power Went Out in Springfield, PA: 200 Amp Panel and Service Upgrade
- 200 Amp Panel and Service Upgrade in Allentown, PA
- More jobs by Jason Z.
- Our electrical services
- Contact Thomas Edison Electric



