By Artur M., Service expert Philadelphia Market Street office
Job at a glance
- Location
- Philadelphia, PA
- Service
- Panel Replacement
- When
- October 2026
- Service expert
- Artur M.
- Called about
- outlets that had stopped working
- Service size
- 100 amp
- Panel brand
- Siemens
- Visits
- 2
- Options offered
- 4
- Inspection
- Passed
What this type of job typically costs
$7,425 to $11,875
Panel replacement, everything on the job
From 856 jobs we completed in the last 18 months.
The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.
Range updated November 10, 2026.
About this service →
A Philadelphia homeowner contacted Thomas Edison Electric after outlets in the kitchen stopped working. One side of the kitchen would shut down whenever small appliances were used.
The client's problem
The client noticed that kitchen outlets on one side of the room would stop working when running small appliances. A previous electrician had attempted to split the kitchen outlets onto different breakers earlier in the year, but the work was not completed correctly.
What our service expert found
During the walk-through, the service expert found that everything in the kitchen was underpowered and all the outlets were outdated. The existing panel was undersized for the electrical demands of the home. The client also pointed out a light fixture near the front door that was buzzing and needed attention.
Options we presented
The service expert presented several options ranging from adding dedicated kitchen circuits to a comprehensive solution that included panel replacement, dedicated outlets, and ballast replacement.
Two dedicated kitchen outlets
Three dedicated kitchen outlet
Three dedicated kitchen outlet and ballast replacement
Panel replacement and three dedicated kitchen outlet and ballast replacement (the client chose this one)
The solution
The client chose the complete solution that addressed all the issues at once. Over two visits, the team replaced the existing panel with a new Siemens 100 amp, 30 space main breaker panel. They installed three dedicated 20 amp circuits for the kitchen with new GFCI outlets and replaced the buzzing ballast in the front door light fixture. The work passed electrical inspection.
Work performed
Replaced existing panel with Siemens 30 space 100 amp main breaker panel
Installed three dedicated 20 amp circuits for kitchen
Installed GFCI outlets for kitchen circuits
Ran concealed wiring for new kitchen circuits
Replaced T8 two tube ballast in front door light fixture
Coordinated and passed electrical inspection
What we installed
- Romex Wire 12 and 2 NM Price Per Foot× 45
- Mulberry 76401, 1G Decora Semi Gloss White Metal Plate× 3
- Pass & Seymour 1597-TRW 15A 125V Self-Test GFCI Tamper-Resistant, White Outlet× 3
- Fluorescent T8 4' Bulb× 2
- T8 2 Bulb Ballast
- Siemens BR 15 Amp Single Pole Breaker× 10
- Siemens BR Q120 20 Amp Single Pole Breaker× 10
- Siemens BR 20 Amp 2 Pole Breaker
- Siemens BR 30 Amp 2 Pole Breaker
- Siemens BR 50 Amp 6 AWG 2 Pole Breaker
- Siemens ec3gb212 21-Position Ground Bar Kit
Why pricing varies
No two homes are wired the same. On this job, the price came down to:
- Service size and whether the main breaker rating changes
- Condition of the existing enclosure, bus bars and breakers
- Grounding and bonding that must be brought up to current code at the same time
- Service entrance conductors and the meter can, when they are part of the scope
- Utility coordination and permit requirements in the jurisdiction
- Surge, AFCI and GFCI protection added during the changeout
- Panel brand and breaker selection
- Accessibility of the panel location and any drywall or masonry work around it
- Code corrections found once the deadfront is off
A service expert prices your job after seeing it, and you approve the price before any work starts.
Why it matters in Philadelphia
Many older Philadelphia homes have electrical systems that were not designed for modern kitchen appliances. When multiple devices share a single circuit, frequent tripping and outlet failures become common problems. Upgrading to dedicated circuits and a properly sized panel ensures the electrical system can safely handle everyday cooking and food preparation.
Common questions
Why do my kitchen outlets keep tripping or losing power?
Kitchen outlets often trip when too many appliances share a single circuit. Modern kitchens need dedicated circuits for countertop outlets to handle the electrical load of toasters, coffee makers, and other small appliances running at the same time.
What is a dedicated circuit and why does my kitchen need them?
A dedicated circuit serves only one outlet or appliance and is not shared with other devices. Kitchens benefit from dedicated circuits because countertop appliances draw significant power, and separating them prevents overloads and tripping.
How do I know if my electrical panel needs to be replaced?
Signs include frequent breaker trips, lack of space for new circuits, or an undersized panel that cannot support your electrical needs. If you want to add circuits for a kitchen upgrade or other improvements, the existing panel may not have the capacity.
What causes a light fixture to buzz?
Buzzing in fluorescent fixtures is often caused by a failing ballast, which regulates the electrical current to the tubes. Replacing the ballast typically eliminates the noise and restores proper operation of the fixture.
Project photos
The service expert on this job
Artur M.
Service expert
Artur is a service expert with Thomas Edison Electric. He has completed more than 1,100 jobs for clients in Bucks, Philadelphia and Montgomery counties. His most common calls are lighting and ceiling fans, outlets and switches, troubleshooting and panel upgrades.
More about Artur →Reviewed by a licensed Thomas Edison Electric service expert on November 9, 2026.
Where this job was
Philadelphia, Pennsylvania, in Philadelphia. Electrical service in Philadelphia
Related
- More panel upgrade case studies
- Panel Replacement: how we do this job
- More jobs from the Philadelphia Market Street office
- Electrical service in Philadelphia
- Main Breaker Failed and the Power Went Out in Springfield, PA: 200 Amp Panel and Service Upgrade
- 200 Amp Panel and Service Upgrade in Allentown, PA
- More jobs by Artur M.
- Our electrical services
- Contact Thomas Edison Electric



