By Mike V., Service expert Newtown office
Job at a glance
- Location
- Morrisville, PA
- Service
- Panel Replacement
- When
- October 2026
- Service expert
- Mike V.
- Called about
- a light fixture or fan that was not working
- Service size
- 100 amp
- Panel brand
- Siemens
- Visits
- 1
- Options offered
- 5
- Inspection
- Passed
What this type of job typically costs
$7,425 to $11,875
Panel replacement, everything on the job
From 856 jobs we completed in the last 18 months.
The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.
Range updated November 10, 2026.
About this service →A Morrisville, Pennsylvania client called about a light fixture that was not working. The service expert arrived to address the fixture and inspect the electrical system.
The client's problem
The client noticed a light fixture had stopped working and wanted it addressed along with some other minor electrical concerns.
What our service expert found
While inspecting the home, the service expert discovered a 35-year-old Challenger panel with visible signs of overheating and over-surging on the main bus bar. The existing panel had no main breaker, which is a significant safety concern. These conditions indicated the panel had reached the end of its safe service life and posed a risk of electrical failure or fire.
Options we presented
The service expert presented two panel replacement options, along with smoke and carbon monoxide alarm packages.
20 space, 40 circuit Siemens panel with surge protection (the client chose this one)
30 space Siemens panel with surge protection
Interconnected smoke and carbon monoxide alarms, in three packages
The solution
The client chose the 20-space 40-circuit Siemens panel with built-in surge protection. The team removed the deteriorated Challenger panel and installed the new 100-amp Siemens main breaker panel, recessing it properly into the wall. They rerouted and traced wiring as needed, installed a GFCI outlet as part of the panel work, and also installed the light fixture the client had provided.
Work performed
Removed 35-year-old Challenger panel with overheating damage
Installed 100-amp Siemens 20-space main breaker panel with surge protection
Recessed panel into wall for proper fit
Rerouted and traced wiring connections
Installed GFCI outlet with panel replacement
Installed client-provided light fixture
What we installed
- Nipple 1 and 2" Rigid Conduit Offset
- RACO 192, 1900 Box 1-1 and 2D - 1 and 2-3 and 4KO Raised Grnd
- RACO 808C, 1900 GFCI Cover
- Eaton TRGF15W 15 Amp 125 VAC GFCI Tamper-Resistant White Outlet
- Siemens ec3gb212 21-Position Ground Bar Kit
- Siemens Type PN 20 Space 100 Amp Main Breaker Panel
Why pricing varies
No two homes are wired the same. On this job, the price came down to:
- Service size and whether the main breaker rating changes
- Condition of the existing enclosure, bus bars and breakers
- Grounding and bonding that must be brought up to current code at the same time
- Service entrance conductors and the meter can, when they are part of the scope
- Utility coordination and permit requirements in the jurisdiction
- Surge, AFCI and GFCI protection added during the changeout
- Panel brand and breaker selection
- Accessibility of the panel location and any drywall or masonry work around it
- Code corrections found once the deadfront is off
A service expert prices your job after seeing it, and you approve the price before any work starts.
Why it matters in Morrisville
Challenger panels from the 1980s and early 1990s are known for reliability issues and are no longer manufactured. Homes in Bucks County often have electrical systems from this era that may show signs of wear after decades of service. Replacing an aging panel before it fails protects the home from electrical fires and ensures the system can safely handle modern electrical demands.
Common questions
Why is a panel without a main breaker a problem?
A main breaker serves as the primary shutoff for all power entering your home and provides overcurrent protection for the entire system. Without one, there is no easy way to disconnect power in an emergency, and the panel lacks a critical layer of protection against electrical faults.
What are the signs that an electrical panel needs replacement?
Common warning signs include visible discoloration or burn marks, a burning smell near the panel, breakers that trip frequently, and the panel feeling warm to the touch. Panels older than 25 to 30 years should be inspected even if no obvious problems are present.
What is the benefit of built-in surge protection in a panel?
Built-in surge protection guards your entire electrical system against voltage spikes from lightning or utility fluctuations. This helps protect appliances, electronics, and the panel itself from damage that can occur during power surges.
Are Challenger panels considered unsafe?
Challenger panels have a history of reliability concerns, and the company is no longer in business, making replacement parts difficult to find. Many electricians recommend replacing these panels when signs of wear or damage appear, as they may not provide adequate protection.
The service expert on this job
Mike V.
Service expert
More about Mike →Reviewed by a licensed Thomas Edison Electric service expert on November 16, 2026.
Where this job was
Morrisville, Pennsylvania, in Bucks. Electrical service in Morrisville
Related
- More panel upgrade case studies
- Panel Replacement: how we do this job
- More jobs from the Newtown office
- Electrical service in Morrisville
- Flickering Hallway Light Reveals a Scorched Panel in Morrisville, PA: 200 Amp Panel Replacement
- Rust and Corrosion Inside the Panel in Harrisburg, PA: 200 Amp Panel and Service Upgrade
- More jobs by Mike V.
- Our electrical services
- Contact Thomas Edison Electric



