By Jason Z., Service expert Lebanon office
Job at a glance
- Location
- Lebanon, PA
- Service
- Panel Replacement
- When
- November 2026
- Service expert
- Jason Z.
- Called about
- a circuit that had stopped working
- Service size
- 200 amp
- Panel brand
- Siemens
- Visits
- 2
- Options offered
- 2
- Inspection
- Passed
What this type of job typically costs
$7,425 to $11,875
Panel replacement, everything on the job
From 856 jobs we completed in the last 18 months.
The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.
Range updated November 10, 2026.
About this service →
A Lebanon, Pennsylvania client contacted Thomas Edison Electric about a circuit that had stopped working in a home they were in the process of purchasing. A home inspection had flagged several electrical issues that needed attention before closing.
The client's problem
The client reported that a circuit in the home had stopped working. The home inspection had already identified electrical concerns, and the client needed a professional evaluation to understand the full scope of work required.
What our service expert found
The service expert performed a visual inspection and opened the main electrical panel, discovering severe rust and corrosion inside the equipment. The outside service entrance was also in poor condition and needed updating. These findings confirmed the home inspector's concerns and indicated that the electrical system required comprehensive replacement to ensure safe, reliable operation.
Options we presented
The service expert presented two options for the deteriorated equipment: a complete service upgrade, or a new panel that kept the original meter and service cable.
200 amp, 40 space Siemens panel with a new meter, service entrance cable, an outdoor disconnect and a grounding system (the client chose this one)
40 space Siemens panel replacement with an outdoor disconnect, updated grounding and surge protection, with the original meter and service cable kept and resealed
The solution
The client chose the comprehensive upgrade with a 40 space 200 amp Siemens main breaker panel, new meter base, service entrance cable mast, outdoor disconnect, and full grounding system. The team returned for a second visit to complete the installation, which also included whole home surge protection and a GFCI receptacle for the basement washer. After the work was completed and power was restored, the team also installed a fan and light fixture in a bedroom. The installation passed inspection and all components functioned properly.
Work performed
Installed 40 space 200 amp Siemens main breaker panel
Replaced 200 amp service mast with new service entrance cable and meter base
Installed outdoor disconnect
Added full grounding system
Installed whole home surge protective device
Installed GFCI receptacle for basement washer
Installed fan and light fixture in bedroom
What we installed
- Eaton ARP00006CH2 Overhead Meter Hub
- SER and SEC Connector 2" Water Tight WTC200× 2
- SEU 2" Flat Cable Connector 676-DC2
- RACO 191, 1900 Box 1-1 and 2D - 3 and 4KO
- RACO 915C, 1900 Duplex and GFCI Cover
- Nipple 1-1 and 2" Offset
- Romex 3 and 8" (1 and 2" KO) NM Non-Metallic Push-in Cable Connector NM94 Each
- Romex 3 and 4" KO Push-In Cable Connector NM95 Each
- 24 in. x 3 and 4 in. x 4 ft. White Scratch-Resistant Stainable PVC backer Board Trim
- Silicone Caulk - Clear
- Meter Mounting Base 23x18, MM23
- Pass & Seymour 1597-TRW 15A 125V Self-Test GFCI Tamper-Resistant, White Outlet
Why pricing varies
No two homes are wired the same. On this job, the price came down to:
- Service size and whether the main breaker rating changes
- Condition of the existing enclosure, bus bars and breakers
- Grounding and bonding that must be brought up to current code at the same time
- Service entrance conductors and the meter can, when they are part of the scope
- Utility coordination and permit requirements in the jurisdiction
- Surge, AFCI and GFCI protection added during the changeout
- Panel brand and breaker selection
- Accessibility of the panel location and any drywall or masonry work around it
- Code corrections found once the deadfront is off
A service expert prices your job after seeing it, and you approve the price before any work starts.
Why it matters in Lebanon
Older homes in Lebanon and throughout Lebanon County often have electrical systems that have deteriorated over time, with rust and corrosion compromising safety and reliability. A corroded panel can lead to poor connections, overheating, and potential fire hazards. Upgrading to a modern panel with proper grounding and surge protection helps protect both the home and its occupants for years to come.
Common questions
Why is rust and corrosion in an electrical panel a serious concern?
Rust and corrosion can compromise the connections between wires and breakers, leading to poor conductivity, overheating, and potential fire hazards. Corroded components may also fail to trip properly during an overload, removing an important safety protection.
What is an outdoor disconnect and why would I need one?
An outdoor disconnect is a switch mounted outside the home that allows the power to be shut off before it enters the building. It provides a safe way for utility workers or emergency responders to cut power quickly and is required by current electrical codes for many installations.
Why is a grounding system important when replacing a panel?
A proper grounding system provides a safe path for electrical current to flow into the earth if there is a fault or surge. This protects people from shock and helps prevent damage to appliances and electronics. Updating the grounding ensures the new panel operates safely.
Should an electrician look at a home before I buy it?
A home inspection is a visual check and often flags the panel without opening it. When the report mentions rust, moisture, an old panel or worn service cable, an electrician can open the equipment and tell you what it needs before closing, so the repair can be part of the purchase conversation.
Project photos
The service expert on this job
Jason Z.
Service expert
Jason is a service expert with Thomas Edison Electric. He has completed more than 2,400 jobs for clients in Berks, Dauphin and Lebanon counties. His most common calls are troubleshooting, outlets and switches, panel upgrades and lighting and ceiling fans.
More about Jason →Reviewed by a licensed Thomas Edison Electric service expert on November 16, 2026.
Where this job was
Lebanon, Pennsylvania, in Lebanon. Electrical service in Lebanon
Related
- More panel upgrade case studies
- Panel Replacement: how we do this job
- More jobs from the Lebanon office
- Electrical service in Lebanon
- Flickering Lights and Melted Panel Wires in Lebanon, PA: 200 Amp Panel and Service Upgrade
- Smoke From the Electrical Panel in Lebanon, PA: 200 Amp Panel and Service Upgrade
- More jobs by Jason Z.
- Our electrical services
- Contact Thomas Edison Electric




