By Jason Z., Service expert Lebanon office
Job at a glance
- Location
- Lebanon, PA
- Service
- Panel Replacement
- When
- August 2026
- Service expert
- Jason Z.
- Called about
- losing power to all or part of the home
- Service size
- 200 amp
- Panel brand
- Siemens
- Visits
- 3
- Options offered
- 2
- Inspection
- Passed
What this type of job typically costs
$7,425 to $11,875
Panel replacement, everything on the job
From 856 jobs we completed in the last 18 months.
The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.
Range updated November 10, 2026.
About this service →A Lebanon, Pennsylvania homeowner called after losing power to their entire home and noticing smoke coming from the electrical panel. The fire department had responded and determined the home was unsafe to energize, prompting the utility company to remove the meter.
The client's problem
The client reported that power went out the previous night and smoke was coming from the main electrical panel. The fire chief explained that the panel had surged and blown out, leaving the home without safe electrical service.
What our service expert found
The service expert removed the panel cover and found extensive damage throughout. Half of the panel was burned, with scorched and melted connections visible on multiple wires. Rust and corrosion inside the equipment indicated that water had been getting into the panel over time, which likely caused the internal components to overheat and ignite. Due to the age and condition of the existing service, a complete replacement was necessary, including bringing everything up to current electrical code requirements.
Options we presented
The service expert presented two options for restoring safe electrical service to the home. Both included a full panel replacement with meter, surge protection, grounding system, panel relocation, and an additional subpanel, with the difference being the routing method for the service entrance conductors.
40-Space 200-Amp Siemens Panel with Meter, SEU riser in pvc conduit, Whole House Surge Protection and Grounding System, relocate 200 amp panel, additional 100 amp sub next to panel (the client chose this one)
40-Space 200-Amp Siemens Panel with Meter, SEU, Whole House Surge Protection and Grounding System, relocate 200 amp panel, additional 100 amp sub next to panel
The solution
The client chose the option with the service entrance conductors routed through PVC conduit up the side of the house. The team replaced the damaged equipment with a new 40 space 200 amp Siemens main breaker panel and installed a separate 20 space 100 amp Siemens subpanel. They installed a new 200 amp service mast with service entrance conductors, a new meter base, and an outdoor disconnect. The service entrance riser was run in two inch PVC conduit for protection. A full grounding system was installed along with a whole house surge protective device. The team rerouted existing wiring to the new panel locations and installed a GFCI receptacle near the panel as required by code. The client was informed that other items in the home may have been damaged by the surge and would need to be evaluated once power was restored.
Work performed
Installed 40 space 200 amp Siemens main breaker panel with meter base and outdoor disconnect
Installed 20 space 100 amp Siemens subpanel
Ran 200 amp service mast and service entrance conductors
Installed two inch PVC conduit for service entrance riser
Added whole house surge protective device
Installed full grounding system
Rerouted existing wiring to new panel locations
Installed GFCI receptacle at panel location
What we installed
- Siemens Type PN 40 Space 200 Amp Main Breaker Panel
- Siemens BR 15 Amp Single Pole Breaker× 12
- Siemens BR Q120 20 Amp Single Pole Breaker× 12
- Siemens BR 20 Amp 2 Pole Breaker
- Siemens BR 30 Amp 2 Pole Breaker
- Siemens BR 50 Amp 6 AWG 2 Pole Breaker
- Mulberry 76401, 1G Decora Semi Gloss White Metal Plate
- Pass & Seymour 1597-TRW 15A 125V Self-Test GFCI Tamper-Resistant, White Outlet
- Siemens ec3gb212 21-Position Ground Bar Kit× 2
- Eaton CHSPT2ULTRA Type 1 Surge Protective Device
- Acorn Clamp 5 and 8 Acorn Direct Burial Bronze Ground Rod Clamp× 2
- Ground Clamp Aluminum 1 and 2 to 1"
Why pricing varies
No two homes are wired the same. On this job, the price came down to:
- Service size and whether the main breaker rating changes
- Condition of the existing enclosure, bus bars and breakers
- Grounding and bonding that must be brought up to current code at the same time
- Service entrance conductors and the meter can, when they are part of the scope
- Utility coordination and permit requirements in the jurisdiction
- Surge, AFCI and GFCI protection added during the changeout
- Panel brand and breaker selection
- Accessibility of the panel location and any drywall or masonry work around it
- Code corrections found once the deadfront is off
A service expert prices your job after seeing it, and you approve the price before any work starts.
Why it matters in Lebanon
Older electrical panels in Lebanon County homes can develop hidden problems from moisture intrusion and age that create serious fire hazards. Water and corrosion inside electrical equipment cause connections to deteriorate and overheat, sometimes without any warning until a failure occurs. Replacing aging equipment with modern panels that include surge protection and proper grounding helps protect both the home and the appliances inside it.
Common questions
How does water get inside an electrical panel?
Water can enter through gaps in the panel cover, deteriorated weatherproofing around the service entrance, or condensation from temperature changes. Over time, this moisture causes rust and corrosion on connections and breaker components, which can lead to overheating and electrical failures.
Why did the entire electrical service need to be replaced instead of just the damaged parts?
When a panel experiences a fire or major failure, the heat and electrical damage often affects components that may look intact but are no longer safe. Additionally, bringing the service up to current code requirements typically means replacing the meter base, adding an outdoor disconnect, and installing proper grounding.
What is the purpose of adding a subpanel alongside the main panel?
A subpanel provides additional circuit capacity and can make it easier to organize circuits for different areas of the home. It also allows for future electrical additions without overcrowding the main panel.
Could the electrical surge have damaged other things in my home?
Yes, a significant electrical surge can damage appliances, electronics, HVAC equipment, and other devices connected to your electrical system. Some damage may not be apparent until the power is restored and each item is tested, so a follow up evaluation may be needed.
Project photos
The service expert on this job
Jason Z.
Service expert
Jason is a service expert with Thomas Edison Electric. He has completed more than 2,400 jobs for clients in Berks, Dauphin and Lebanon counties. His most common calls are troubleshooting, outlets and switches, panel upgrades and lighting and ceiling fans.
More about Jason →Reviewed by a licensed Thomas Edison Electric service expert on November 9, 2026.
Where this job was
Lebanon, Pennsylvania, in Lebanon. Electrical service in Lebanon
Related
- More panel upgrade case studies
- Panel Replacement: how we do this job
- More jobs from the Lebanon office
- Electrical service in Lebanon
- Dead Ceiling Outlets and a Maxed Out Panel in Lebanon, PA: 200 Amp Panel and Service Upgrade
- Main Breaker Failed and the Power Went Out in Springfield, PA: 200 Amp Panel and Service Upgrade
- More jobs by Jason Z.
- Our electrical services
- Contact Thomas Edison Electric




