By Jason Z., Service expert Lebanon office
Job at a glance
- Location
- Harrisburg, PA
- Service
- Panel Replacement
- When
- October 2026
- Service expert
- Jason Z.
- Called about
- damage to the meter, mast or service cable outside the home
- Service size
- 200 amp
- Panel brand
- Siemens
- Visits
- 2
- Options offered
- 3
- Inspection
- Passed
What this type of job typically costs
$7,425 to $11,875
Panel replacement, everything on the job
From 856 jobs we completed in the last 18 months.
The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.
Range updated November 10, 2026.
About this service →A Harrisburg client contacted Thomas Edison Electric after the attachment point for their electrical service was ripped off the exterior of their home. The damage left the service cable and mast compromised and in need of repair.
The client's problem
The client noticed that the attachment point where the utility lines connected to their home had been torn away, leaving the electrical service exposed and potentially unsafe.
What our service expert found
Upon inspection, the service expert found that the electrical system was over fifty years old, which meant simply reattaching the attachment point was not an option. The aging components would need to be brought up to current code requirements, and the entire service entrance needed to be addressed to ensure safe and reliable power delivery.
Options we presented
The service expert presented three options ranging from replacing just the service entrance cable with surge protection and grounding, to a complete panel and meter replacement with the cable run protected inside PVC conduit.
40-Space 200-Amp Siemens Panel with Meter, SEU riser in pvc conduit, Whole House Surge Protection and Grounding System, outdoor disconnect (the client chose this one)
40-Space 200-Amp Siemens Panel with Meter, SEU, Whole House Surge Protection and Grounding System, outdoor disconnect
SEU, Whole House Surge Protection and Grounding System, outdoor disconnect
The solution
The client chose the most comprehensive option for maximum protection. The team installed a new 40-space 200-amp Siemens main breaker panel along with a new meter base and outdoor disconnect. The service entrance cable was run through PVC conduit up the side of the house to protect it from future damage and moisture intrusion. A whole-house surge protective device was added at the service entrance, and a full grounding system was installed. The work required two visits and passed inspection, restoring safe and reliable power to the home.
Work performed
Installed new 40-space 200-amp Siemens main breaker panel
Replaced 200-amp service mast with new meter base and outdoor disconnect
Ran service entrance cable through PVC conduit for protection
Installed whole-house surge protective device at service entrance
Added full grounding system
Installed GFCI receptacle
What we installed
- Mulberry 76401, 1G Decora Semi Gloss White Metal Plate
- Pass & Seymour 1597-TRW 15A 125V Self-Test GFCI Tamper-Resistant, White Outlet
- Siemens BR 15 Amp Single Pole Breaker× 12
- Siemens BR Q120 20 Amp Single Pole Breaker× 12
- Siemens BR 20 Amp 2 Pole Breaker
- Siemens BR 30 Amp 2 Pole Breaker
- Siemens BR 50 Amp 6 AWG 2 Pole Breaker
- Siemens ec3gb212 21-Position Ground Bar Kit
- Eaton CHSPT2ULTRA Type 1 Surge Protective Device
- Acorn Clamp 5 and 8 Acorn Direct Burial Bronze Ground Rod Clamp× 2
- Ground Clamp Aluminum 1 and 2 to 1"
- Intersystem Bonding Grounding Bridge - ARLGB5
Why pricing varies
No two homes are wired the same. On this job, the price came down to:
- Service size and whether the main breaker rating changes
- Condition of the existing enclosure, bus bars and breakers
- Grounding and bonding that must be brought up to current code at the same time
- Service entrance conductors and the meter can, when they are part of the scope
- Utility coordination and permit requirements in the jurisdiction
- Surge, AFCI and GFCI protection added during the changeout
- Panel brand and breaker selection
- Accessibility of the panel location and any drywall or masonry work around it
- Code corrections found once the deadfront is off
A service expert prices your job after seeing it, and you approve the price before any work starts.
Why it matters in Harrisburg
Older homes in Harrisburg and throughout Dauphin County often have electrical systems that were installed decades ago and may not meet current safety standards. When damage occurs to the service entrance, it creates an opportunity to upgrade the entire system rather than patch aging components. Running the service cable in protective conduit helps guard against weather damage and physical impact, which is especially valuable in areas that experience seasonal storms.
Common questions
Why can't the attachment point just be reattached?
When the existing electrical system is several decades old, the components often no longer meet current safety codes. Reattaching to aging equipment could create safety hazards and would likely fail inspection, so a more comprehensive upgrade is typically required.
What is the benefit of running the service cable in PVC conduit?
PVC conduit provides a protective barrier around the service entrance cable, shielding it from physical damage, weather exposure, and moisture intrusion. This added protection helps prevent future problems and extends the life of the installation.
Why is a whole-house surge protector recommended with a panel upgrade?
A surge protective device installed at the service entrance helps guard all the circuits in your home against voltage spikes from lightning or utility grid fluctuations. Installing it during a panel upgrade is efficient because the electrical system is already being worked on.
What does the outdoor disconnect do?
An outdoor disconnect provides a way to shut off power to the home from outside, which is important for safety during emergencies or when utility workers need to service the lines. Current codes often require this disconnect as part of a service upgrade.
Project photos
The service expert on this job
Jason Z.
Service expert
Jason is a service expert with Thomas Edison Electric. He has completed more than 2,400 jobs for clients in Berks, Dauphin and Lebanon counties. His most common calls are troubleshooting, outlets and switches, panel upgrades and lighting and ceiling fans.
More about Jason →Reviewed by a licensed Thomas Edison Electric service expert on November 9, 2026.
Where this job was
Harrisburg, Pennsylvania, in Dauphin. Electrical service in Harrisburg
Related
- More panel upgrade case studies
- Panel Replacement: how we do this job
- More jobs from the Lebanon office
- Electrical service in Harrisburg
- Main Breaker Failed and the Power Went Out in Springfield, PA: 200 Amp Panel and Service Upgrade
- 200 Amp Panel and Service Upgrade in Allentown, PA
- More jobs by Jason Z.
- Our electrical services
- Contact Thomas Edison Electric




