By Jason Z., Service expert Lebanon office
Job at a glance
- Location
- Harrisburg, PA
- Service
- Panel Replacement
- When
- November 2026
- Service expert
- Jason Z.
- Called about
- outlets that had stopped working
- Service size
- 200 amp
- Panel brand
- Siemens
- Visits
- 2
- Options offered
- 2
- Inspection
- Passed
- Inspection passed
- Yes
What this type of job typically costs
$7,425 to $11,875
Panel replacement, everything on the job
From 856 jobs we completed in the last 18 months.
The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.
Range updated November 10, 2026.
About this service →A Harrisburg client called after noticing outlets in their home had stopped working. Thomas Edison Electric scheduled a visit to inspect the issue and evaluate the electrical system.
The client's problem
The client reported that one or more receptacles in the home were no longer functioning properly.
What our service expert found
The service expert inspected the main electrical system and discovered rust and corrosion inside the equipment, which indicated moisture intrusion. They also found that the existing 100 amp service was overloaded, meaning the home was drawing more power than the system could safely handle. These conditions posed risks for continued electrical problems and potential safety hazards.
Options we presented
The service expert presented two options to address the failing equipment and upgrade the electrical service.
A 40 space, 200 amp Siemens panel with new meter, service entrance cable, whole home surge protection and grounding system (the client chose this one)
A 30 space Siemens panel with surge protection
The solution
The client chose the comprehensive upgrade with the 40 space, 200 amp Siemens panel. The team returned to install the new panel along with a new meter base, outdoor disconnect, and service entrance cable mast. They also installed a full grounding system and whole home surge protection. A dedicated circuit was run to a living room receptacle that had not been working, and additional receptacles were installed or replaced as needed. The work passed the electrical inspection, and once power was restored, everything in the home functioned properly.
Work performed
Installed 40 space, 200 amp Siemens main breaker panel
Replaced 200 amp service mast with service entrance cable, new meter base and outdoor disconnect
Installed full grounding system
Added whole home surge protection device
Ran new 20 amp circuit to living room receptacle
Installed GFCI receptacle and standard receptacles as needed
What we installed
- Mulberry 76401, 1G Decora Semi Gloss White Metal Plate
- Pass & Seymour 1597-TRW 15A 125V Self-Test GFCI Tamper-Resistant, White Outlet
- Siemens BR 15 Amp Single Pole Breaker× 12
- Siemens BR Q120 20 Amp Single Pole Breaker× 12
- Siemens BR 20 Amp 2 Pole Breaker
- Siemens BR 30 Amp 2 Pole Breaker
- Siemens BR 50 Amp 6 AWG 2 Pole Breaker
- Siemens ec3gb212 21-Position Ground Bar Kit
- Eaton CHSPT2ULTRA Type 1 Surge Protective Device
- Acorn Clamp 5/8 Acorn Direct Burial Bronze Ground Rod Clamp× 2
- Ground Clamp Aluminum 1/2 to 1"
- Intersystem Bonding Grounding Bridge - ARLGB5
Why pricing varies
No two homes are wired the same. On this job, the price came down to:
- Service size and whether the main breaker rating changes
- Condition of the existing enclosure, bus bars and breakers
- Grounding and bonding that must be brought up to current code at the same time
- Service entrance conductors and the meter can, when they are part of the scope
- Utility coordination and permit requirements in the jurisdiction
- Surge, AFCI and GFCI protection added during the changeout
- Panel brand and breaker selection
- Accessibility of the panel location and any drywall or masonry work around it
- Code corrections found once the deadfront is off
A service expert prices your job after seeing it, and you approve the price before any work starts.
Why it matters in Harrisburg
Older homes in Harrisburg and throughout Dauphin County often have electrical systems that were not designed for modern power demands. Rust and corrosion inside electrical equipment can lead to connection failures and safety hazards. Upgrading to a properly sized service with modern surge protection helps protect appliances and provides reliable power for years to come.
Common questions
Why would rust and corrosion form inside my electrical panel?
Moisture can enter electrical equipment through damaged weatherheads, worn seals, or condensation over time. Once inside, it causes rust and corrosion on connections and components, which can lead to poor electrical contact and potential failures.
What does it mean if my electrical service is overloaded?
An overloaded service means your home is using more electricity than the panel and wiring were designed to handle. This can cause breakers to trip frequently, outlets to stop working, and in some cases create fire hazards from overheated wiring.
Why would I need a new meter base along with a new panel?
When upgrading from 100 amp to 200 amp, the meter base and service entrance components must also be upgraded to handle the increased capacity. This ensures the entire system from the utility connection to the panel is rated for the new service size.
What does whole home surge protection do?
A whole home surge protection device is installed at the main panel and helps protect your electrical system and appliances from voltage spikes. These spikes can come from lightning, utility switching, or other sources and can damage sensitive electronics throughout your home.
Project photos
The service expert on this job
Jason Z.
Service expert
Jason is a service expert with Thomas Edison Electric. He has completed more than 2,400 jobs for clients in Berks, Dauphin and Lebanon counties. His most common calls are troubleshooting, outlets and switches, panel upgrades and lighting and ceiling fans.
More about Jason →Reviewed by a licensed Thomas Edison Electric service expert on November 19, 2026.
Where this job was
Harrisburg, Pennsylvania, in Dauphin. Electrical service in Harrisburg
Related
- More panel upgrade case studies
- Panel Replacement: how we do this job
- More jobs from the Lebanon office
- Electrical service in Harrisburg
- Service Line Attachment Torn Off the House in Harrisburg, PA: 200 Amp Panel and Service Upgrade
- 35 Year Old Challenger Panel With No Main Breaker in Morrisville, PA: 100 Amp Panel Replacement
- More jobs by Jason Z.
- Our electrical services
- Contact Thomas Edison Electric




