Open Now

Flickering Hallway Light Reveals a Scorched Panel in Morrisville, PA: 200 Amp Panel Replacement

Morrisville, PA Job done October 2026 Panel Replacement

A Morrisville client called about flickering lights. The service expert found scorched panel connections and installed a new 40 space Siemens panel with surge protection.

Main electrical panel with breakers and wiring installed in basement wall location in Morrisville, PA
Mike V.

By Mike V., Service expert Newtown office

Job at a glance

Location
Morrisville, PA
Service
Panel Replacement
When
October 2026
Service expert
Mike V.
Called about
a light fixture or fan that was not working
Service size
200 amp
Panel brand
Siemens
Visits
1
Options offered
4
Inspection
Passed

What this type of job typically costs

$7,425 to $11,875

Panel replacement, everything on the job

From 856 jobs we completed in the last 18 months.

The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.

Range updated November 10, 2026.

About this service →

A Morrisville, Pennsylvania client called about a hallway light fixture that was flickering, suspecting it might just need new bulbs. What the service expert discovered during the visit revealed much more significant concerns inside the electrical panel.

The client's problem

The client noticed that a recently installed light fixture in the hallway was flickering. They also mentioned that the home was over 40 years old and had not received any electrical safety updates since they moved in.

What our service expert found

The service expert opened the electrical panel and found scorched and melted connections on the main bus bar, indicating high electrical resistance and overheating. Multiple loose connections were present throughout the panel, and there were signs of overloading on at least one circuit. The panel had no surge protection, leaving the home vulnerable to grid surges and lightning strikes. Carbon buildup was visible on the flickering light fixture itself, pointing to voltage surges affecting the fixture wiring. These conditions together created a fire hazard and explained the flickering the client had noticed.

Stairwell with dark carpeted steps, cream-colored walls, ceiling light fixture, and handrail installation in Morrisville, PA
Finding 1
Installed white outlet and switch plate on wall next to door frame in Morrisville, PA
Finding 2
Installed light switches and outlet on wall with white cover plate and brass hardware in Morrisville, PA
Finding 3
Main electrical panel with breakers and wiring installed in basement wall location in Morrisville, PA
Finding 4
Electrical panel with multiple circuit breakers rated 20 amps, showing internal wiring and connections in Morrisville, PA
Finding 5
Main electrical panel with breakers and wiring installed in residential home in Morrisville, PA
Finding 6

Options we presented

The service expert presented two panel replacement options, along with a dryer circuit priced for two possible locations.

  • 30 space Siemens panel replacement

  • 40 space Siemens panel replacement (the client chose this one)

  • A dryer circuit to a bedroom closet

  • A dryer circuit to the main bedroom

The solution

The client chose the 40 space Siemens panel replacement for its greater capacity and flexibility. The team removed the old panel and installed a new Siemens 40 space 200 amp main breaker panel with copper bussing. They replaced all connections and installed GFCI protection as part of the panel work. A Siemens whole panel surge protective device was added to guard against external voltage spikes. All work was completed in a single visit and scheduled for electrical inspection.

Work performed

  • Removed outdated electrical panel with scorched bus bar connections

  • Installed Siemens 40 space 200 amp main breaker panel

  • Replaced and secured all electrical connections

  • Installed GFCI protection with panel replacement

  • Added whole panel surge protective device

  • Scheduled electrical inspection

What we installed

  • Nipple 1 and 2" Rigid Conduit Offset
  • RACO 192, 1900 Box 1-1 and 2D - 1 and 2-3 and 4KO Raised Grnd
  • RACO 808C, 1900 GFCI Cover
  • Eaton TRGF15W 15 Amp 125 VAC GFCI Tamper-Resistant White Outlet
  • Siemens BR 15 Amp Single Pole Breaker× 12
  • Siemens BR Q120 20 Amp Single Pole Breaker× 12
  • Siemens BR 20 Amp 2 Pole Breaker
  • Siemens BR 30 Amp 2 Pole Breaker
  • Siemens BR 50 Amp 6 AWG 2 Pole Breaker
  • Siemens ec3gb212 21-Position Ground Bar Kit
  • Siemens Type PN 40 Space 200 Amp Main Breaker Panel
  • Siemens QSPD2A065P Whole-Panel Surge Protective Device

Why pricing varies

No two homes are wired the same. On this job, the price came down to:

  • Service size and whether the main breaker rating changes
  • Condition of the existing enclosure, bus bars and breakers
  • Grounding and bonding that must be brought up to current code at the same time
  • Service entrance conductors and the meter can, when they are part of the scope
  • Utility coordination and permit requirements in the jurisdiction
  • Surge, AFCI and GFCI protection added during the changeout
  • Panel brand and breaker selection
  • Accessibility of the panel location and any drywall or masonry work around it
  • Code corrections found once the deadfront is off

A service expert prices your job after seeing it, and you approve the price before any work starts.

Why it matters in Morrisville

Homes in Morrisville and throughout Bucks County that were built 40 or more years ago often have original electrical panels that have never been updated. Loose connections and overheating inside a panel can develop slowly over decades, eventually causing flickering lights, tripped breakers, or worse. Replacing an aging panel with modern equipment and surge protection helps protect both the home and the appliances inside it.

Common questions

Can flickering lights indicate a serious electrical problem?

Yes, flickering lights can be a symptom of loose or damaged connections inside your electrical panel. While sometimes the cause is minor, persistent flickering warrants a professional inspection to rule out overheating or overloaded circuits.

How do I know if my electrical panel needs to be replaced?

Signs include visible scorch marks, a burning smell near the panel, frequently tripping breakers, or a panel that is 30 to 40 years old. An electrician can inspect the internal connections and bus bars to determine if replacement is necessary.

What does a whole panel surge protector do?

A whole panel surge protector guards your entire electrical system against voltage spikes from the utility grid or lightning strikes. It helps protect appliances, electronics, and wiring throughout your home from damage caused by sudden surges.

Why would an electrician recommend a 40 space panel over a 30 space panel?

A 40 space panel provides more room for additional circuits if you add appliances, finish a basement, or make other upgrades in the future. It offers flexibility without needing another panel upgrade down the road.

Mike V.

The service expert on this job

Mike V.

Service expert

More about Mike →

Reviewed by a licensed Thomas Edison Electric service expert on November 16, 2026.

Where this job was

Morrisville, Pennsylvania, in Bucks. Electrical service in Morrisville

Related

Need the same kind of help at home?

Book online or call us 24/7. A service expert will look at your system and walk you through your options.

The Thomas Edison Electric office team and electricians together

Careers at Thomas Edison Electric

Here We Grow Again...

Like what you see? We are always looking for great new team members.

See Our Openings