By Artur M., Service expert Allentown office
Job at a glance
- Location
- Quakertown, PA
- Service
- Panel Replacement
- When
- October 2026
- Service expert
- Artur M.
- Called about
- a circuit that had stopped working
- Service size
- 200 amp
- Panel brand
- Siemens
- Visits
- 2
- Options offered
- 4
- Inspection
- Passed
What this type of job typically costs
$7,425 to $11,875
Panel replacement, everything on the job
From 856 jobs we completed in the last 18 months.
The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.
Range updated November 10, 2026.
About this service →A Quakertown, Pennsylvania client contacted Thomas Edison Electric about a circuit that had stopped working. The service expert visited the home to diagnose the issue and evaluate the electrical system.
The client's problem
The client noticed that one of their circuits had completely stopped working, leaving part of their home without power.
What our service expert found
During the evaluation, the service expert determined that the existing electrical panel and service equipment needed replacement to restore reliable power and bring the system up to current standards. The assessment revealed that a comprehensive upgrade would address the immediate circuit failure while also improving the overall safety and capacity of the home's electrical system.
Options we presented
The service expert presented four options for the panel and service, each with a different mix of service entrance equipment, grounding and surge protection.
200 amp service replacement with a rigid mast, upgraded grounding and surge protection
200 amp service replacement with a service cable mast, upgraded grounding and surge protection
200 amp, 40 space Siemens panel and meter with new service cable, whole house surge protection and a grounding system
200 amp, 40 space Siemens panel and meter with a service cable riser, a main breaker disconnect, whole house surge protection and a grounding system (the client chose this one)
The solution
The client selected a 40-space 200-amp Siemens panel with a new meter base, SEU riser with main breaker disconnect, whole house surge protection, and a complete grounding system. The team installed the new Siemens main breaker panel, replaced the 200-amp service mast with SEU and a new meter base and outdoor disconnect, added a full grounding system, installed an Eaton whole house surge protective device, and replaced a 15-amp GFCI receptacle. The project required two visits and passed electrical inspection.
Work performed
Installed 40-space 200-amp Siemens main breaker panel
Replaced 200-amp service mast with SEU, new meter base, and outdoor disconnect
Added complete grounding system to meet current codes
Installed whole house surge protective device
Replaced 15-amp GFCI receptacle
Coordinated electrical inspection
What we installed
- Mulberry 76401, 1G Decora Semi Gloss White Metal Plate
- Pass & Seymour 1597-TRW 15A 125V Self-Test GFCI Tamper-Resistant, White Outlet
- Siemens BR 15 Amp Single Pole Breaker× 12
- Siemens BR Q120 20 Amp Single Pole Breaker× 12
- Siemens BR 20 Amp 2 Pole Breaker
- Siemens BR 30 Amp 2 Pole Breaker
- Siemens BR 50 Amp 6 AWG 2 Pole Breaker
- Siemens ec3gb212 21-Position Ground Bar Kit
- Eaton CHSPT2ULTRA Type 1 Surge Protective Device
- Acorn Clamp 5 and 8 Acorn Direct Burial Bronze Ground Rod Clamp× 2
- Ground Clamp Aluminum 1 and 2 to 1"
- Intersystem Bonding Grounding Bridge - ARLGB5
Why pricing varies
No two homes are wired the same. On this job, the price came down to:
- Service size and whether the main breaker rating changes
- Condition of the existing enclosure, bus bars and breakers
- Grounding and bonding that must be brought up to current code at the same time
- Service entrance conductors and the meter can, when they are part of the scope
- Utility coordination and permit requirements in the jurisdiction
- Surge, AFCI and GFCI protection added during the changeout
- Panel brand and breaker selection
- Accessibility of the panel location and any drywall or masonry work around it
- Code corrections found once the deadfront is off
A service expert prices your job after seeing it, and you approve the price before any work starts.
Why it matters in Quakertown
Older homes in Quakertown and throughout Bucks County often have electrical systems that were not designed for modern power demands. A panel upgrade with proper grounding and surge protection helps prevent circuit failures, protects sensitive electronics, and ensures the home meets current safety standards. The outdoor disconnect also provides an important safety feature for emergency responders and utility workers.
Common questions
Why would a dead circuit lead to a full panel replacement?
Sometimes a circuit failure reveals broader issues with an aging electrical system. When the panel or service equipment is outdated or undersized, replacing individual components may not solve the underlying problem, making a full upgrade the more reliable long term solution.
What is the purpose of an outdoor main breaker disconnect?
An outdoor disconnect allows the main power to be shut off from outside the home without entering the building. This is an important safety feature for emergency responders and utility workers, and it is required by current electrical codes in many situations.
Why is a grounding system included with a panel upgrade?
A proper grounding system provides a safe path for electrical faults to travel to the earth, reducing the risk of shock and fire. Many older homes lack adequate grounding, so upgrading the panel is an opportunity to bring the entire system up to current safety standards.
How does whole house surge protection help my home?
A whole house surge protector installed at the panel helps shield your appliances, electronics, and electrical system from voltage spikes caused by lightning or utility fluctuations. It provides a first line of defense that individual plug-in surge strips cannot match.
Project photos
The service expert on this job
Artur M.
Service expert
Artur is a service expert with Thomas Edison Electric. He has completed more than 1,100 jobs for clients in Bucks, Philadelphia and Montgomery counties. His most common calls are lighting and ceiling fans, outlets and switches, troubleshooting and panel upgrades.
More about Artur →Reviewed by a licensed Thomas Edison Electric service expert on November 16, 2026.
Where this job was
Quakertown, Pennsylvania, in Bucks. Electrical service in Quakertown
Related
- More panel upgrade case studies
- Panel Replacement: how we do this job
- More jobs from the Allentown office
- Electrical service in Quakertown
- Rust and Corrosion Inside the Panel in Harrisburg, PA: 200 Amp Panel and Service Upgrade
- 35 Year Old Challenger Panel With No Main Breaker in Morrisville, PA: 100 Amp Panel Replacement
- More jobs by Artur M.
- Our electrical services
- Contact Thomas Edison Electric




