By Mike H., Service expert Bryn Mawr office
Job at a glance
- Location
- Wynnewood, PA
- Service
- Panel Replacement
- When
- November 2026
- Service expert
- Mike H.
- Called about
- outlets that had stopped working
- Service size
- 200 amp
- Panel brand
- Siemens
- Visits
- 2
- Options offered
- 4
- Inspection
- Passed
What this type of job typically costs
$7,425 to $11,875
Panel replacement, everything on the job
From 856 jobs we completed in the last 18 months.
The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.
Range updated November 10, 2026.
About this service →A Wynnewood, Pennsylvania homeowner contacted Thomas Edison Electric after noticing that several outlets in their home had stopped working. The client needed a professional evaluation to determine the cause and restore power to the affected areas.
The client's problem
The client reported that multiple outlets throughout the home were no longer functioning, leaving them unable to use electrical devices in those areas.
What our service expert found
During the evaluation, the service expert determined that the home's existing 100 amp electrical service needed to be upgraded to meet current electrical code standards and support the household's needs. The assessment revealed an opportunity to modernize the entire electrical distribution system while addressing the outlet issues.
Options we presented
The service expert presented four options, from a whole home safety inspection to three ways of upgrading the service to 200 amps.
A whole home safety inspection
200 amp service upgrade with arc fault breakers
200 amp service upgrade without arc fault breakers
200 amp service upgrade with a Leviton smart panel and smart breakers (the client chose this one)
The solution
The client chose the 200 amp service upgrade with a Leviton smart panel and breakers. The team removed and disposed of the existing service components including the service cable, meter socket, and interior panel. They installed a new Siemens 200 amp meter and disconnect, ran new service conductors to the basement panel location, and installed a Leviton 200 amp 42 space smart panel. All existing branch circuits were reconnected with compatible Leviton smart breakers, including arc fault circuit breakers where required by code. The team also installed a full grounding system and a whole home surge protection device. All circuits were organized, identified, and labeled, and the work was scheduled for underwriter inspection.
Work performed
Removed and disposed of existing service cable, meter socket, and electrical panel
Installed Siemens 200 amp meter and exterior disconnect
Installed full grounding system
Installed Leviton 200 amp 42 space smart panel with compatible smart breakers
Installed arc fault circuit breakers as required by code
Installed whole home surge protection device
Organized and labeled all circuits in new panel
Arranged for underwriter inspection
What we installed
- Leviton 15 Amp AFCI Single Pole Smart Breaker LB115-AST× 7
- Leviton 20 Amp Single Pole Smart Breaker LB120-ST× 4
- Siemens 200 Amp Combination Meter Mains Disconnect
- Acorn Clamp 5 and 8 Acorn Direct Burial Bronze Ground Rod Clamp× 2
- Ground Clamp Aluminum 1 and 2 to 1"
- Intersystem Bonding Grounding Bridge - ARLGB5
- Ground Rod 5 and 8" Copper× 2
- CU Bare #4 Solid Price Per Foot× 25
- CU Bare #6 Solid Price Per Foot× 25
- Eaton CHSPT2ULTRA Type 1 Surge Protective Device
- Leviton 15 Amp Single Pole Smart Breaker LB115-ST× 5
- Leviton 30 Amp 2 Pole Smart Breaker LB230-ST
Why pricing varies
No two homes are wired the same. On this job, the price came down to:
- Service size and whether the main breaker rating changes
- Condition of the existing enclosure, bus bars and breakers
- Grounding and bonding that must be brought up to current code at the same time
- Service entrance conductors and the meter can, when they are part of the scope
- Utility coordination and permit requirements in the jurisdiction
- Surge, AFCI and GFCI protection added during the changeout
- Panel brand and breaker selection
- Accessibility of the panel location and any drywall or masonry work around it
- Code corrections found once the deadfront is off
A service expert prices your job after seeing it, and you approve the price before any work starts.
Why it matters in Wynnewood
Many homes in Wynnewood and throughout Montgomery County were built with 100 amp service that may no longer meet the demands of modern households. Upgrading to 200 amp service with smart panel technology provides increased capacity, better circuit monitoring, and improved safety features. A properly grounded system with surge protection also helps safeguard electronics and appliances from voltage irregularities common in older residential areas.
Common questions
Why would outlets stop working throughout my home?
Outlets can stop working due to tripped breakers, loose connections, or issues within the electrical panel itself. In older homes, an aging or undersized panel may struggle to distribute power reliably, causing circuits to fail or behave erratically.
What is a smart electrical panel and how does it benefit my home?
A smart electrical panel allows you to monitor energy usage by circuit and can provide alerts about electrical issues. It offers greater visibility into your home's electrical system and can help identify problems before they become serious.
Why is a full grounding system important during a panel upgrade?
A proper grounding system provides a safe path for electrical current in case of a fault, reducing the risk of shock and fire. During a panel upgrade, ensuring the grounding meets current standards is essential for both safety and code compliance.
What does whole home surge protection do?
Whole home surge protection is installed at the main panel and helps shield your electrical system and connected devices from voltage spikes. These surges can come from lightning, utility switching, or large appliances cycling on and off, and can damage sensitive electronics over time.
Project photos
Filmed on the job
Watch the walkthrough
Mike H. filmed this on the job in Wynnewood, so you can see what we found and what the work involved.
The service expert on this job
Mike H.
Service expert
Mike is a service expert and field trainer with Thomas Edison Electric. He has completed more than 1,400 jobs for clients in Bucks, Philadelphia and Montgomery counties. His most common calls are lighting and ceiling fans, troubleshooting, outlets and switches and panel upgrades.
More about Mike →Reviewed by a licensed Thomas Edison Electric service expert on November 16, 2026.
Where this job was
Wynnewood, Pennsylvania, in Montgomery. Electrical service in Wynnewood
Related
- More panel upgrade case studies
- Panel Replacement: how we do this job
- More jobs from the Bryn Mawr office
- Electrical service in Wynnewood
- Rust and Corrosion Inside the Panel in Harrisburg, PA: 200 Amp Panel and Service Upgrade
- 35 Year Old Challenger Panel With No Main Breaker in Morrisville, PA: 100 Amp Panel Replacement
- More jobs by Mike H.
- Our electrical services
- Contact Thomas Edison Electric




