Open Now

Burning Smell and a Breaker That Never Tripped in Lansdale, PA: 200 Amp Panel Replacement

Lansdale, PA Job done November 2026 Panel Replacement

A Lansdale client with dead outlets and a burning smell needed a full panel replacement after the service expert found a corroded, water damaged panel and scorched wiring behind a kitchen outlet.

Electrical panel with main breaker and multiple circuit breakers stacked vertically with wiring connections in Lansdale, PA
Mike V.

By Mike V., Service expert North Wales office

Job at a glance

Location
Lansdale, PA
Service
Panel Replacement
When
November 2026
Service expert
Mike V.
Called about
outlets that had stopped working
Service size
200 amp
Panel brand
Siemens
Visits
2
Options offered
5
Inspection
Passed

What this type of job typically costs

$7,425 to $11,875

Panel replacement, everything on the job

From 856 jobs we completed in the last 18 months.

The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.

Range updated November 10, 2026.

About this service →

A Lansdale, Pennsylvania client called about outlets that had stopped working and a burning smell coming from one of them. They were concerned there might be a serious electrical issue in their home.

The client's problem

The client noticed that some outlets in their home were no longer working, and one outlet had started producing a burning smell that worried them about potential safety hazards.

What our service expert found

The service expert discovered a panel over 30 years old with rust and corrosion inside, along with clear signs of water intrusion into the electrical equipment. When examining the kitchen receptacle, they found scorched and melted connections with evidence of an electrical fire inside the junction box, yet the breakers had not tripped to protect the circuit. The home also had no surge protection, and a microwave receptacle installed by others was found to be improperly wired without GFCI protection, missing its cover plate, and lacking proper grounding. These conditions created serious shock and fire hazards that required immediate attention.

White duplex outlet with USB ports installed in white cover plate on brick wall next to light switch in Lansdale, PA
Finding 1
Installed GFCI outlet with white cover plate on travertine tile wall, green indicator light visible in Lansdale, PA
Finding 2
Kitchen cabinet interior with electrical outlet box and wiring installed above microwave oven in Lansdale, PA
Finding 3
Duplex outlet installed in electrical box mounted on wood framed wall during rough-in phase in Lansdale, PA
Finding 4
Electrical panel with main breaker and multiple circuit breakers stacked vertically with wiring connections in Lansdale, PA
Finding 5
Electrical panel installation in progress with exposed wiring, breakers, and water damage visible on wall below panel in Lansdale, PA
Finding 6
Main electrical panel with multiple circuit breakers and wiring installed in wall-mounted enclosure in Lansdale, PA
Finding 7
Electrical outlet box with exposed wiring and blue wire connectors during installation in basement wall in Lansdale, PA
Finding 8
Electrical outlet box opened in brick wall showing internal wiring and connections during installation work in Lansdale, PA
Finding 9

Options we presented

The service expert presented a full panel replacement, a panel cleanup, and smoke and carbon monoxide alarm packages for the rest of the home.

  • 30 space Siemens panel replacement (the client chose this one)

  • A panel cleanup

  • Interconnected smoke and carbon monoxide alarms, in three packages

The solution

The client chose the 30 space Siemens panel replacement to address the deteriorated equipment and safety hazards. The team returned the following day and installed a new Siemens 30 space 200 amp main breaker panel with copper bussing and plug on neutral breakers for reliable power distribution. They also installed a Siemens whole panel surge protective device to guard the home's electrical system and appliances. As a courtesy, the team installed a GFCI receptacle in the kitchen area to correct the unprotected outlet condition. The installation was tested to ensure everything was in proper working order.

Work performed

  • Removed deteriorated 30 plus year old electrical panel with water damage and corrosion

  • Installed new Siemens 30 space 200 amp main breaker panel

  • Installed whole panel surge protective device

  • Installed GFCI receptacle in kitchen to correct unprotected outlet

  • Tested all circuits and connections to verify proper operation

What we installed

  • Siemens BR 15 Amp Single Pole Breaker× 10
  • Siemens BR Q120 20 Amp Single Pole Breaker× 10
  • Siemens BR 20 Amp 2 Pole Breaker
  • Siemens BR 30 Amp 2 Pole Breaker
  • Siemens BR 50 Amp 6 AWG 2 Pole Breaker
  • Siemens ec3gb212 21-Position Ground Bar Kit
  • Siemens Type PN 30 Space 100 Amp Main Breaker Panel
  • Siemens QSPD2A065P Whole-Panel Surge Protective Device

Why pricing varies

No two homes are wired the same. On this job, the price came down to:

  • Service size and whether the main breaker rating changes
  • Condition of the existing enclosure, bus bars and breakers
  • Grounding and bonding that must be brought up to current code at the same time
  • Service entrance conductors and the meter can, when they are part of the scope
  • Utility coordination and permit requirements in the jurisdiction
  • Surge, AFCI and GFCI protection added during the changeout
  • Panel brand and breaker selection
  • Accessibility of the panel location and any drywall or masonry work around it
  • Code corrections found once the deadfront is off

A service expert prices your job after seeing it, and you approve the price before any work starts.

Why it matters in Lansdale

Older homes in Lansdale and throughout Montgomery County often have electrical panels that have been exposed to moisture over the decades, leading to corrosion that compromises safety. When breakers fail to trip during an electrical fault, as happened here, the risk of fire increases significantly. Replacing aging equipment before a serious incident occurs protects both the home and the family living in it.

Common questions

Why didn't my breaker trip when there was a fire inside the outlet?

Breakers can fail to trip when they are old, corroded, or damaged by moisture. Over time, the internal mechanisms wear out and may not respond properly to overcurrent conditions, which is why aging panels with signs of deterioration should be evaluated and replaced.

How does water get inside an electrical panel?

Water can enter through roof leaks, condensation, improperly sealed conduit entries, or foundation moisture that travels along wiring. Once inside, it causes rust and corrosion that degrades connections and can lead to arcing and fire hazards.

What does a whole panel surge protector do?

A whole panel surge protector guards your entire electrical system against voltage spikes from lightning, utility switching, or large appliances cycling on and off. It helps protect sensitive electronics, appliances, and wiring throughout your home from damage caused by power surges.

How do I know if my electrical panel needs to be replaced?

Warning signs include rust or corrosion on or inside the panel, a burning smell, breakers that trip frequently or fail to trip when they should, and outlets that stop working. If your panel is over 25 to 30 years old, having it inspected by a licensed electrician is a good precaution.

Mike V.

The service expert on this job

Mike V.

Service expert

More about Mike →

Reviewed by a licensed Thomas Edison Electric service expert on November 16, 2026.

Where this job was

Lansdale, Pennsylvania, in Montgomery. Electrical service in Lansdale

Related

Need the same kind of help at home?

Book online or call us 24/7. A service expert will look at your system and walk you through your options.

The Thomas Edison Electric office team and electricians together

Careers at Thomas Edison Electric

Here We Grow Again...

Like what you see? We are always looking for great new team members.

See Our Openings