Open Now

EV Charger Installation in Lebanon, PA

Lebanon, PA Job done July 2026 EV Charger Installation

A Lebanon home needed faster EV charging and a safer kitchen outlet. The team installed a dedicated 50-amp circuit and GFCI receptacle.

EV charging station mounted on white painted concrete block wall with black charging cable coiled and stored in Lebanon, PA
Mike D.

By Mike D., Service expert Lebanon office

Job at a glance

Location
Lebanon, PA
Service
EV Charger Installation
When
July 2026
Service expert
Mike D.
Called about
charging an electric vehicle at home
Service size
50 amp
Panel brand
Eaton
Visits
2
Options offered
3

What this type of job typically costs

$2,075 to $4,025

EV charger installation, everything on the job

From 69 jobs we completed in the last 18 months.

The middle half of what our clients paid for this work alone across Pennsylvania and New Jersey, before discounts, refreshed every month. A licensed service expert sees your home and gives a written price before any work starts.

Range updated November 10, 2026.

About this service →

A Lebanon, Pennsylvania client contacted Thomas Edison Electric about charging their electric vehicle at home. They were experiencing very slow charging with their existing setup and also had a kitchen outlet that needed to be replaced for safety reasons.

The client's problem

The client noticed their current 120-volt outlet in the garage was taking far too long to charge their electric vehicle. They also had a kitchen outlet near the sink that lacked proper ground fault protection, which had been flagged during an inspection as a safety concern.

What our service expert found

The service expert found an overloaded circuit that was contributing to the slow charging issue. The existing garage circuit simply did not have the amperage needed for efficient Level 2 EV charging, and the kitchen outlet near water required a GFCI receptacle to meet current safety standards and protect against electrical shock.

Person holding a dark gray cable organizer or storage pouch, wearing beige pants and brown boots, seated indoors with wooden flooring and a white storage shelf visible in Lebanon, PA
Finding 1

Options we presented

The service expert presented options including a dedicated EV charger circuit with GFCI outlet replacement, a standalone GFCI replacement in the kitchen, or an EV charger installation alone.

  • EV car charger and GFCI outlet replacement (the client chose this one)

  • GFCI replacement in kitchen

  • EV car charger

The solution

The client chose the combined EV charger circuit and GFCI outlet replacement. The team completed the work over two visits, first installing the GFCI outlet in the kitchen along with a paddle switch as a courtesy. On the second visit, the service expert ran cable from the electrical panel to the garage, drilled through the concrete block wall, installed PVC conduit along and down the wall to a junction box, ran the cable through the conduit, and terminated a 50-amp receptacle. A new 50-amp Eaton breaker was installed in the panel, and the system was tested successfully with the client verifying their vehicle charged properly.

Work performed

  • Installed dedicated 50-amp, 240-volt circuit for EV charging

  • Ran cable from electrical panel through concrete block wall to garage

  • Installed PVC conduit along garage wall to junction box

  • Terminated 50-amp receptacle at junction box

  • Installed 50-amp Eaton breaker in electrical panel

  • Replaced kitchen outlet with 15-amp GFCI receptacle

  • Tested EV charging system and verified vehicle charging operation

What we installed

  • NM D and C Oval Connector 3 and 4" WIL104
  • Eaton CHN250GF 50 Amp GFCI Two Pole Breaker
  • Pass & Seymour S2-32-W 2-Gang, Old Work Deep Remodeler Box 32 cu.in
  • Romex Wire 6 and 3 NM Price Per Foot× 25
  • Leviton SL703 Stainless Steel 2-Gang Range and Dryer and EV Wall Plate
  • Leviton 1450R-000 WR Rated 50 Amp EV Charging Receptacle and Outlet, Heavy Duty
  • PVC 1" Conduit× 20
  • Mulberry 76401, 1G Decora Semi Gloss White Metal Plate
  • Pass & Seymour 1597-TRW 15A 125V Self-Test GFCI Tamper-Resistant, White Outlet

Why pricing varies

No two homes are wired the same. On this job, the price came down to:

  • Charger amperage and whether it is hardwired or plugged into a receptacle
  • Distance and route from the panel to the parking location
  • Available capacity in the existing panel and whether a load calculation allows the new circuit
  • Load management or a panel upgrade when capacity is not available
  • Wall material, attic or crawlspace access and any conduit runs outdoors
  • Charger brand, model and any smart features
  • Permit and inspection requirements
  • GFCI and disconnect requirements for the location

A service expert prices your job after seeing it, and you approve the price before any work starts.

Why it matters in Lebanon

Many Lebanon area homes were built before electric vehicles became common, meaning garages often lack the dedicated high-amperage circuits needed for efficient charging. Installing a proper 240-volt, 50-amp circuit allows Level 2 charging speeds that can fully charge a vehicle overnight rather than over multiple days. Addressing GFCI protection near water sources also brings older homes up to current safety standards, reducing the risk of electrical shock.

Common questions

Why is my electric vehicle charging so slowly at home?

Most standard household outlets provide only 120 volts, which delivers a trickle charge that can take a full day or longer to charge an EV. A dedicated 240-volt circuit provides Level 2 charging speeds, which can fully charge most vehicles overnight.

Does my electrical panel need to be upgraded for an EV charger?

It depends on your panel's available capacity. A service expert will assess whether your panel can support the additional 50-amp load or if upgrades are needed. Many homes have sufficient capacity for a dedicated EV circuit without a full panel replacement.

Why do outlets near sinks need GFCI protection?

GFCI outlets detect ground faults and shut off power almost instantly to prevent electrical shock. Water conducts electricity, so outlets near sinks, in kitchens, bathrooms, and other wet areas require this protection to keep occupants safe.

Can I use my existing EV charger with a new outlet installation?

Yes, if you already have a portable Level 2 charger or adapter that came with your vehicle, a dedicated 240-volt receptacle allows you to plug it in directly. This gives you faster charging without purchasing additional charging equipment.

Project photos

Newly installed duplex outlet and single-pole switch on drywall with wood trim above in Lebanon, PA
Interior wall with light switch and duplex outlet installed in cream-colored drywall, ready for finishing in Lebanon, PA
Mike D.

The service expert on this job

Mike D.

Service expert

Reviewed by a licensed Thomas Edison Electric service expert on November 9, 2026.

Where this job was

Lebanon, Pennsylvania, in Lebanon. Electrical service in Lebanon

Related

Need the same kind of help at home?

Book online or call us 24/7. A service expert will look at your system and walk you through your options.

The Thomas Edison Electric office team and electricians together

Careers at Thomas Edison Electric

Here We Grow Again...

Like what you see? We are always looking for great new team members.

See Our Openings